SDS

ManualsBrandsSnapStone ManualsFlooringMoss 12 in. x 12 in. Porcelain Floor Tile (5 sq. ft. / case)

PAGE 1

Section 1 – Product identification

Trade Name: Porcelain Tile

Common Names: Porcelain Tile

Manufactured For: COMC, LLC (Brands - SnapSys, SnapStone, Avaire, Eclipse, ZipTile)

13423 F Street, Omaha, NE 68137

Telephone: 1-877-263-5861 / Fax: 402-614-0207 / Text: 402-305-1961

Section 2 – HazardouS ingredientS

All components are inorganic materials, no hazardous

Crystalline Silica (Quartz), Amorphous Silica (fused)

Section 3 – PHySical data

Boiling Point: None Specific Gravity (H2O = 1): 2.6

Vapor Pressure (mm Hg): None Melting Point: None

Vapor Density (AIR = 1): None Evaporation Rate(Butyl Acetate = 1): None

Solubility in Water: None Appearance and Odor: Solid, Odorless

Section 4 – fire and exPloSion HazardS

Flash Point: None Flammable Limits: None

LEL: N/A UEL: N/A

Extinguishing Media: Nonammabble, not applicable

Special Fire Fighting Procedures: Nonammabble, not applicable.

Unusual Fire and Explosion Hazards: None.

Section 5 – reactivity

Stability: Stable Hazardous Polymerization: Will not occur.

Conditions to avoid: None. Incompatibility: None.

Hazardous Decomposition Products: None

Section 6 – HealtH Hazard data

Route(s) of Entry: None

Health Hazards (Acute and Chronic): None

Medical Conditions aggravated by exposure: None.

Emergency and First Aid Procedures: None

Section 7 – PrecautionS for Safe Handling and uSe

Steps to Be Taken in Case Material is Released or Spilled: None

Waste Disposal Method: All components are inorganic materials, no hazardous. No special request for the waste disposal

method. To bury into the ground will be ne.

Precautions to Be taken in Handling and Storing: The product is heavy and fragile. It must avoid falling down or tipping

over in moving and storing the products.

Section 8 – control MeaSureS

Respiratory Proctection : No special requirement

Protective Gloves: Not applicable Eye Protection: Not applicable

Work/Hygienic Practices: Not applicable Other Protective Clothing or Equipment: Not applicable

SnapSys Porcelain Tile Material Safety Data Sheet, Version 1.5 11/2013

PORCELAIN TILE

Notice to Reader: To the best of our knowledge, the information contained herein is accurate. However, neither the above named supplier nor any of it’s

subsidiaries assumes any liability whatsoever for the accuracy or completeness of the information contained herein. Final determination of suitability of any

material is the sole responsibility of the user. All materials may present unknown hazards and should be used with caution. Although certain hazards are

described herein, we cannot guarantee that these are the only hazards that exist.

Floating Porcelain Tile System

MATERIAL SAFETY DATA SHEET

Summary of content (10 pages)

PAGE 1
Floating Porcelain Tile System Material Safety Data Sheet porcelain tile Section 1 – Product Identification Trade Name: Common Names: Manufactured For: Telephone: Porcelain Tile Porcelain Tile COMC, LLC (Brands - SnapSys, SnapStone, Avaire, Eclipse, ZipTile) 13423 F Street, Omaha, NE 68137 1-877-263-5861 / Fax: 402-614-0207 / Text: 402-305-1961 Section 2 – Hazardous Ingredients All components are inorganic materials, no hazardous Crystalline Silica (Quartz), Amorphous Silica (fused) Section 3 –
PAGE 2
Floating Porcelain Tile System Material Safety Data Sheet Cured Adhesive For Plastic Tray Section 1 – Product Identification Trade Name: CK.
PAGE 3
Floating Porcelain Tile System Material Safety Data Sheet Cured Adhesive For Plastic Tray Section 6 – HEALTH HAZARD DATA Health Hazards: Acute Eye Contact- Direct contact can cause severe irritation. Acute Skin Contact- Direct contact can cause slight irritation. Skin Absorption- Not toxic. Acute Inhalation- Extremely low in volatility, therefore not likely to pose a problem fron inhalation.
PAGE 4
Material Safety Data Sheet Floating Porcelain Tile System Polystyrene plastic tray Section 1 – Chemical Product and Company Identification Trade Names: Common Names/Synonyms: Product Use: Manufacturer: Telephone: Total lmpact Polystyrene Polystyrene, HIPS, MIPS Flooring tray Total, P O Box 674411, Houston,TX 77267-4411 (800) 322-3462 | FAX: 713-483-5293 | Emergency Number: (800) 424-9300 (Chemtrec) Section 2 – Composition and Information on Ingredients Chemical Name Polystyrene (lmpact)
PAGE 5
Floating Porcelain Tile System Material Safety Data Sheet Polystyrene plastic tray Section 5 – Fire Fighting Measures Flammability of the Product: May be combustible at high temperature Auto-ignitionTemperature: 440oC (824oF) Flashpoint: >392oF (200oC) Flammable Limits: Not available Products of Combustion: Carbon oxides (CO, CO2), soot Fire Hazards in Presence of Various Substances: No specific information is available Explosion Hazards in Presence of Various Substances: Risks of explosi
PAGE 6
Floating Porcelain Tile System Material Safety Data Sheet Polystyrene plastic tray Section 9 – Physical and Chemical Properties Physical State / Appearance: Molecular Weight: Melting/Freezing Point: Specific Gravity: VOC: Solubility in Water: Odor: Color: Molecular Formula: Solid Pellets Not available >132.22oC( 270oF) 1.
PAGE 7
Floating Porcelain Tile System Material Safety Data Sheet Polystyrene plastic tray Section 14 – Transport Information (for bulk shipments, non-bulk shipments may differ) COT Classification: DOT Proper Shipping Name: UN Number: Packing Group: USCG Proper Shipping Name: TDG Classification: ADR/RID Classification: IMO/IMDG Classification: ICAO/IATA Classification: Not a DOT controlled material (United States) Not available Not established Not available Not available Not controlled under TDG (Canada) Not
PAGE 8
Floating Porcelain Tile System Material Safety Data Sheet thermoplastic elastomer/rubber for polystyrene plastic tray Section 1 – Product Identification Trade Name: Article Number: Common Names: Manufacturer: Telephone: GLS 358-052 77189 Thermoplastic Elastomer.
PAGE 9
Floating Porcelain Tile System Material Safety Data Sheet thermoplastic elastomer/rubber for polystyrene plastic tray Section 5 – reactivity data Stability: Conditions to Avoid: Materials to Avoid: Hazardous Decomposition: Hazardous Polymerization: Stable Avoid exposure to heat, spark, or open flame. Prolonged heating in excess of 275 C accelerates thermal degradation. Thermal decomposition products may include hazardous fumes of titanium oxide. Will not occur.
PAGE 10
Floating Porcelain Tile System Material Safety Data Sheet thermoplastic elastomer/rubber for polystyrene plastic tray Section 8 – CONTROL MEASURES Respiratory Protection: Use NIOSH approved respiratory protection where exposure levels exceed regulatory limits for hazardous components and/or for particulate matter. Ventilation: Use ventilation system to maintain exposure levels within the ACGIH TLV. Gloves: Use gloves when polymer is hot to minimize skin contact.