SDS
Floating Porcelain Tile System
MATERIAL SAFETY DATA SHEET
POLYSTYRENE PLASTIC TRAY
COT Classication: Not a DOT controlled material (United States)
DOT Proper Shipping Name: Not available
UN Number: Not established
Packing Group: Not available
USCG Proper Shipping Name: Not available
TDG Classication: Not controlled under TDG (Canada)
ADR/RID Classication: Not controlled under ADR (Europe)
IMO/IMDG Classication: Not controlled under IMDG
ICAO/IATA Classication: Not controlled under IATA
HCS Classication: Product is not a “Hazardous Chemical” as dened by OSHA HCS 29 CFR 1910.1200
U.S. Federal Regulations: TSCA inventory: Polystyrene (lmpact)
SARA 313 toxic chemical notication and release reporting:No products were found.
Clean water act (CWA)307:No products were found
Clean water act (CWA)311: No products were found
Clean air act (CAA)112 accidental release prevention: No products were found
Clean air act ( CAA)112 regulated ammable substances: No products were found
Clean air act (CAA)112 regulated toxic substances: No products were found
lnternational Regulations: WHMIS (Canada): Not controlled under WHMIS (Canada).
CEPA DSL: Polystyrene (lmpact)
EINECS: Not available.
DSCL (EEC): Not controlled under DSCL( Europe).
International Lists: No products were found.
State Regulations: No products were found.
California prop.65: There are no Proposition 65 chemicals present in our polystyrene resins
at levels that would require a warning under the Califomia Safe Drinking Water and
Toxic Enforcement Act.
Label Requirements: lrritating vapors to respiratory system and eyes may form when polymer is processed at high
temperatures. Molten or heated material in skin contact can cause severe burns.
References: -HSDB- Hazardous Substances Data Bank
-RTECS- Registry of Toxic Effects of Chemicals Substances.
Other Considerations: This product is made for industrial purposes only. Acceptable business/technical terms
necessary for medical device applications must be developed by contacting your Total
Petrochemicals Inc. sales representative. Without such documented business terms,
Total Petrochemicals Inc. makes no representations, and disclaims all warranties express
or implied, concerning biocompatibility and/or suitability of this product for
medical device applications.
PAGE 4
SnapSys Polystyrene Plastic Tray Material Safety Data Sheet, Version 1.4, 11/2013
Notice to Reader: To the best of our knowledge, the information contained herein is accurate. However, neither the above named supplier nor any of it’s
subsidiaries assumes any liability whatsoever for the accuracy or completeness of the information contained herein. Final determination of suitability of any
material is the sole responsibility of the user. All materials may present unknown hazards and should be used with caution. Although certain hazards are
described herein, we cannot guarantee that these are the only hazards that exist.