Use and Care Manual

SnapStone Porcelain Tile Care & Maintenance
With proper care and maintenance, your SnapStone
®
tile floor is made to be highly
durable and long-lasting. Porcelain tile is naturally stain, scratch and moisture resistant.
AFTER INSTALLATION
After installation you may resume light traffic on the floor after 24 hours. Normal traffic
can resume after 72 hours.
REGULAR CLEANING
Avoid using cleaning chemicals on your floor for one week after installation.
DO NOT USE commercial enzyme-based cleaners, vinegar or steam mops.
Regular sweeping or vacuuming and damp mopping is recommended to keep your
floor looking its best.
For deep cleaning, or to address messy or sticky spills, use a detergent cleaner
designed for porcelain. Avoid cleaning products that contain wax or paraffin.
GROUT CARE
Snapstone Flexible Grout is self-sealing but will still require periodic cleaning; especially
in high-traffic areas. A cleaner such as SoftScrub® with Bleach and a soft-bristled brush
should remove any accumulated dirt. Cleaning your grout lines monthly or quarterly will
make it easier to maintain.
For more on care & maintenance, please visit www.snapstone.com

Summary of content (1 pages)