ROTHER Instruction Manual

!
3. take any output from one of the modules and plug it into an audio mixer /
speaker or take that output and plug it into the CV in of a third module such as a
VCO and plug that into a mixer. or take CV out and audio!
out!
!
The point is you need to somehow hear your creation!
!
4. adjust speed/cv depth/pitch/chaos knobs to taste!!!
!
!
ok!
if for your second module you are using a standard VCO I recommend using the
exponential input with an attenuator knob to control the depth of cv (very
important to have depth control)!
coming from the other module!
!
if one of the modules for A or B you're using is a VCO I recommend trying the
triangle or sine waves As the out to plug into the other modules cv input and then
checking out square or sawtooth waves.!
!
this patch can be expanded in many ways!
!
instead of just using A and B one possibility is to use a chain of modules for A
and a chain of modules for B!
good luck#with your new module!
!
happy chaos!! !
!