User Manual

21. Q MODE SWITCH:!
Comp=Q COMPENSATION. This mode will have less volume change as Q increases!
good for a “softer” or more early 80s vcf sound. !
!
NRML= regular q behavior. High Q will bring volume of signal down. More typical of
earlier VCFS!
!
!
!
HIGH-Q/SINE mode= the SINE OSCILLATOR mode. simply flip to the right and set Q
knob to a high value and flip routing DOWN. the oscillator will be a good sine with 1/oct
characteristics that then feeds into a nice CV wave shaper with the options of feedback
and VCA as well as phasey effects by utilizing the VC MIXER knob! !
!
22. WS CV/BUS JACK (CV INPUT FOR WAVE SHAPER SECTION AND FOR WS
SIDE OF CV BUS SWITCH) (normals to LFO OUTPUT)!
!
23. MIX CV JACK (CV INPUT FOR VC MIXER WHICH OVER-RIDES THE CV
CONNECTED TO THE VC MIXER FROM THE MIX SIDE OF THE LFO SWITCH)!
!
24. VCF CV JACK (EXPO CV INPUT FOR VCF WHICH CONNECTS DIRECTLY TO
THE FILT MOD ATTENUVERTER (over-riding the CV BUS )!
!
25. VCF 1/V ( CONNECT KEYBOARD OR SEQUENCER VOLTAGES HERE)!
DOES NOT EFFECT FILT MOD KNOB OR CV BUS.!
!
26. Q CV JACK (CONNECTS AN EXTERNAL CV DIRECTLY TO THE Q MOD KNOB-
over-rides CV BUS)!
!
27. LFO CV JACK (adds speed offset to LFO SPEED KNOB)!
!
28. VCA CV JACK (allows VCA to be externally OPENED AND CLOSED from an
external envelope) (internal envelope can still be used for modulation)!
!
29. ENV OUT JACK (allows TIDAL WAVE A/R ENV TO BE USED EXTERNALLY)!
!
30. INPUT/DRY (MAIN SIGNAL INPUT) connects to DRY of ROUTING SWITCH. and
DRY of MIX SOURCE.!
!
31. VC MIX OUT ( output of VC MIXER) normals to VCA IN.!
!
32. VCF INPUT (direct input to VCF..bypasses routing switch) NORMALS TO ROUTING
SWITCH OUTPUT. (dry or WS out)!
!
33. LIN FM INPUT (LIN CV MODULATION OF VCF)!