User Manual

Checking the product

Please check if the product contains the following items. If there are some

items missing, please contact the technical services.

1. TFT LCD monitor

2. User's manual (including product warranty).

3. AC to DC adapter.

4. Power cable (

the power cable can be different according to use environment

5. Signal Cable ( Monitor Connection Cable )

6. Monitor Base

7. Audio cable

8. USB cable

How to connect Base part into Monitor

Stand Part

How to install the monitor stand

1. Lay the monitor on a flat surface.

2. Attach the monitor to the connecting parts as

shown in the picture.

3. Push and pull A and B to detach and

attach the monitor.

Installation

1. Turn off the power connected to the monitor before connecting to an

external device.

2. Power connection

Connect the adapter to the DC jack connected to the signal cable of the

monitor and connect the power cable.

3. Signal connection

This signal input terminal is a D-SUB connector. Connect the signal cable

to the signal input of the computer.

4. Turn on the power of the monitor.

5. Turn on the power of the system that you want to use.

6. Continue with the operation when the screen appears. You can adjust the

desired status of the screen using control buttons at the bottom of the

monitor.

7. Up/Down Monitor Angle should not be over 15/20 degree.

8. If you wan to finish the operation, turn off the system power and then turn

off the power of the monitor.

Installation of the product

ENG