User's Manual

电 话 Tel：[phone]
10
 The installation method and position must be suitable for the weight and size of
SNE9610 (with suspension loop) (L * W * H: 224mm * 121.25mm* 31.8mm).
 Make sure that there is enough space around SNE9610, that the installation
position is 1500mm from the ground, and that at least 500mm of maintenance space is
reserved. The minimum spacing shall meet the following requirements shown in the
following figure.
3.2.2 Wall Mounting
 Select an appropriate mounting plane.
 Use a marker to mark the locations of drilling holes.
Opening Center Distance
Length
Horizontal distance
214mm
Vertical distance
47.5mm
Fig. 3-1 Opening Dimensions of SNE9610 Wall Mounting
 Drill holes on the marking locations with a hammer drill.
 Fix all expansion tubes into the holes with rubber hammer.
 Install SNE9610 on the wall with gaskets and self-tapping screws.
 Check and confirm whether SNE9610 is firmly installed.
3.2.3 Installation of Guide Rail
 Install the guide rail in a proper position and fix it well.
 Install two guide rail mounting fixed seats with the center hole distance of
214mm.
 Install SNE9610 on the mounting fixed seat of the guide rail with screws.
 Check whether SNE9610 is firmly installed.