User's Manual
Table Of Contents
- Foreword
- Chapter 1 Safety Precautions
- Chapter 2 Product Introduction
- Chapter 3 Equipment Installation
- Chapter 4 Electrical Connection
- Chapter 5 System Running
- Chapter 6 WEB Configuration
- Chapter 7 Technical Specifications
- Chapter 8 Contact Us
电 话 Tel:0551-65538567
12
Chapter 4 Electrical Connection
4.1 Port Description
Fig. 4-1 Schematic Diagram of SNE9610 Port
No.
Port
Port Description
A
POWER
DC 12V input, width voltage, supporting
DC12-36V
B
LAN1
Ethernet Port 1, default IP: 192.16.1.136
C
LAN2
Ethernet Port 2, default IP: 192.16.2.136
D
COM1-4
RS485 Communication Interface 1-4
E
COM5-8
RS485 Communication Interface 5-8
4.2 Device Connection
4.2.1 Connection of Inverter
Select RS485 communication cables with an appropriate length; 2* 0.75mm²
Shielded twisted-pair cables are recommended.
Peel off the protective layer of the communication cable by about 15mm and the