User's Manual
Table Of Contents
- Foreword
- Chapter 1 Safety Precautions
- Chapter 2 Product Introduction
- Chapter 3 Equipment Installation
- Chapter 4 Electrical Connection
- Chapter 5 System Running
- Chapter 6 WEB Configuration
- Chapter 7 Technical Specifications
- Chapter 8 Contact Us
电 话 Tel：0551-65538567
14
4.2.4 Connection of Electricity Meter
When the electricity meter is connected to SNE9610, it is recommended to use
the electricity meter that meets the requirements of Modbus protocol.
The communication cables from the electricity meter are connected to COM
Port A and COM Port B of RS485 of SNE9610.
4.2.5 Connection of Environment Monitoring Instrument
When the environment monitoring instrument is connected to SNE9610, it is
recommended to use the environment monitoring instrument that meets the
requirements of Modbus protocol.
Connect the communication cables from the environment monitoring instrument
to COM Port A and COM Port B of RS485 of SNE9610.
4.3 Connection of Power Supply
SNE9610 supports DC12V power input. Before connecting cables, prepare
two-core DC cables.
Connect the AC side of the power adapter to the AC220V power supply, and the
DC side to the POWER port of SNE9610.