User's Manual
Table Of Contents
- Foreword
- Chapter 1 Safety Precautions
- Chapter 2 Product Introduction
- Chapter 3 Equipment Installation
- Chapter 4 Electrical Connection
- Chapter 5 System Running
- Chapter 6 WEB Configuration
- Chapter 7 Technical Specifications
- Chapter 8 Contact Us
电 话 Tel:0551-65538567
19
support the address query, you can click the [Search] button to query the inverters,
and the result will be returned after the query; click the [Save] button to save it.
6.4.3 Address Allocation Adjustment
Click [Special Features] ->[Address Allocation Adjustment] button to enter the
Address Allocation Adjustment interface of the inverter.
Fig. 6-4 Address Allocation Adjustment
Click [Update] button to update the slave address of the inverter and then click
[Inquire] button to obtain the updated address.(Requiring the firmware support of
inverter)
Click [One-key assignment address] button to assign the inverter address, enter
the start address and click Assignment button.
Fig. 6-5 One-Key Assignment Address
Click [Edit] button to adjust the address, enter the slave IP address of the
inverter to be modified and click [Sure] button.