User's Manual

电 话 Tel：[phone]
22
6.4.5 Restart Device
 Click [System]->[Recover From The Factory Set Up] button to enter the backup
and recovery setting interface.
Fig. 6-10 Backup and Recovery Setting Interface
 Click [Execute] button under the Reboot option to restart the system.
Wait for one minute. After the system is restarted, the acquisition communication
configuration of the inverter is completed. You can view the collected real-time data
in the real-time data interface. In addition, you can log in the cloud to check the
device status, and five minutes later, you can view the data of the inverters connected
with the device.
6.5 Data Configuration of Other Devices
SNE9610 supports the data access of devices in other photovoltaic areas, such as
convergence box, meteorological instrument and electricity meter; supports standard
MODBUS protocol and baud rate of 9600bps. In this manual, an electricity meter is
taken as an example.
6.5.1 Adding Equipment Type
 Click [Equipment]->[Equipment Type] button to enter the equipment module