User's Manual

电 话 Tel：[phone]
31
instruments connected: consistent with the actual;
Ammeter acquisition quantity- number of ammeters connected: consistent with
actual acquisition;
Convection box acquisition quantity- number of convergence boxes: consistent
with actual acquisition.
6.5.8 Upload Setting of Cloud Data
Click [Special Features] - >[Ginlong Upload] button to enter the setting of
uploading cloud data.(This step is not required for inverters)
Fig. 6-25 Upload Setting of Cloud Data
 Click [Edit] button to modify the Measured Point Name and Coefficient.
Measured point name is consistent with the ID generated of the collection and
measurement points.
Coe is 1 by default and you can adjust the Coe if there is any deviation.
 Click [System] - >[Recover From The Factory Set Up] to enter the backup and
recovery setting interface and then click [Execute] button under Reboot option to
complete the restart settings.