User's Manual

电 话 Tel：[phone]
33
6.6.2 Inverter I-V Curve Scanning Setting
Fig. 6-27 I-V Curve Scanning Setting
 Click [Special Features] - >[I-V Curve scan Set up] to enter the I-V curve
scanning setting interface of the inverter.
 Select the corresponding acquisition process and fill in the slave address,
starting voltage and voltage interval of RS485 corresponding to the inverter for
setting.
6.6.3 Startup &Shutdown Control of Inverter
 Click [Special Features] - >[Switch machine remote Control] button to enter the
inverter startup & shutdown setting interface.
 Select the corresponding acquisition process, fill in the slave address of RS485
corresponding to the inverter and select ON/ OFF for set.