User's Manual

电 话 Tel：[phone]
3
Chapter 1 Safety Precautions
1.1 Safety Instructions
SNE9610 produced by SNEGRID Power Technology Co., Ltd. (hereinafter
referred to as SNEGRID) is designed and tested strictly in accordance with relevant
safety laws and regulations. However, as it is electrical and electronic equipment, the
following safety instructions shall be followed during installation and maintenance,
otherwise improper operations will cause injury and property loss to operators and the
third-party.
 Operate it under the operating conditions as described in this manual.
 The installation and operating environment shall not exceed the provisions of
relevant international or national standards.
 It is not allowed to disassemble and change the product or modify the software
code without authorization.
 Follow the operation instructions and safety warnings in the product and
document during operation.
1.2 Personnel Requirements
 The installation and maintenance personnel of SNEGRID must receive strict
training to understand various safety precautions and master correct operation
methods.
 Only qualified professionals or trained personnel are allowed to install, operate
and maintain the equipment.
 Only qualified professionals are allowed to dismantle safety facilities and repair
the equipment.
 The personnel operating the equipment, including operators, trained personnel
and professionals, should have the special operation qualifications required by the