C520 - User Manual

23
Temporarily silencing the ringer
When the conference phone is ringing, you can temporarily silence its ringer without
disconnecting the call. The next call will ring normally at the preset volume.
Press
on the base unit. The
symbol appears in the upper right corner of the display.
Note: You can also press or on the phone to adjust the ringer volume. The
adjustment will be saved and applied to the next incoming call.
Locating wireless microphones
This feature helps you find any misplaced wireless mics within the range of the
base unit.
1. Press
, press
2
A B C
to open the Status menu directly, or highlight STATUS and
select by pressing
.
2. With the Status menu on the display, press
4
GHI
to open the Wireless microphone
menu directly, or scroll down and highlight Wireless microphone, then press
.
3. With the Wireless microphone menu on the display, press
Locate
.
The display of the phone shows the message
Wireless microphones will ring.
Press CANCEL/Back to stop.
All wireless microphones that are not on the charging cradles play the location
tone for 30 seconds.
Muting the location tone
• On the phone, press
Back
or .
• On the wireless microphone(s), press
.
• Putting the microphone(s) back onto the charging cradle will also mute the location
tone.
Conference phone operation