Operation Manual

47
snom 715 User Manual Using the Phone
Active calls
Connected call
The connection is indicated by the symbol of the two receivers , followed by the caller or callee ID, if
transmitted. The default setting for the presentation of caller ID on the display is "Name". If you wish to
change the setting to number, name and number, number and name, or "full contact" (the entire URL of
the connected caller/callee is displayed), open the phone's web interface > Preferences > General
Information and select a setting from the drop-down menu of "Number Display Style".
Hold
One call on hold
• Putting the ongoing call on hold: Press
Hold
or the line key. Held calls are indicated threefold:
◦ By the text on the display
◦ By the slowly blinking line key (green LED)
◦ By the glowing call indication LED (red LEDs)
You can now receive and make calls and put other calls on hold. If the other party hangs up while
on hold, the "held call" indicators on your phone are turned off.
• Picking up the held call: Press its line key.
Holding multiple calls
When you have one call on hold and you are connected to a second call, press
Hold
or the line key
to put the second call on hold. Continue likewise to put more calls on hold.
Fig. 1 Fig. 2
When multiple calls are on hold, the status bar tells you how many there are (Fig. 1).
◦ Use
to scroll through the held calls. Your input on the phone's keys will affect the call
on-screen at the time, i.e., the caller shown in the contact area of the display, preceded by the
symbol
.