Quick Installation Guide

19
Registering the handset to the base station
The handset must be registered to the base station in order to make and receive
calls.
There are three methods of registration:
• Auto registration
• Manual registation (triggered via Web UI).
• Manual registation (triggered via LINK button on base).
Registering the handset - Auto registration
1. Make sure the base station is connected to power and the network.
2. Press the MENU/Confirm key.
The User Settings screen appears.
3. Press
or to scroll down to Registration and press OK.
The Registration screen appears.
4. With This device selected, press OK.
The “This device” screen appears.
5. Press
or to scroll down to Auto Registration and press OK.
The handset displays:
Trying to
auto-register...
Keep the
Handset within
base’s range.
If registration is successful:
The handset beeps and displays “Handset X Registered” .
If registration fails:
The handset displays “Registration failed”. Press OK.
The handset displays “Consult the phone administrator to provision the
device IPEI to the base.” Press IPEI to display the phone’s IPEI and serial
number. Give these numbers to your phone administrator.