Operation Manual

SNOM 820 MANUAL V.8 SETTING UP THE PHONE

3. Attach the footstand.

4. Plug the Ethernet (network) cable into the RJ45 connector labeled

“NET” and plug the other end into the network side to establish a data

link. The second RJ45 connector, labeled “PC”, is for daisy-chaining

further Ethernet devices without the need for a second Ethernet connec-

tion line.

5. Insert the plug of the power supply into the connector labeled “DC 5V”

and hook up the plug to the mains.

6. If you want to use a headset, connect it to the RJ audio jack labeled

“EHS”.

7. Place the phone on an even, horizontal surface.

INITIALIZATION

snom phones are plug-and-play. In most cases your phone will register and

initialize automatically.

1. Connect the phone to your network or your router.

2. Do not touch any keys while registration and initialization are taking

place. The process usually takes a couple of minutes.

3. You will be prompted in English to select a language.