Operation Manual
64
D375 | Snom 370 User Manual Customizing the Phone Settings
Customizing the phone settings
See "The phone's web interface" on page 31 on how to open the phone’s web interface, how the
web interface works, and how to change the settings. See "User mode/administrator mode" on page
34 on the dierence between administrator and user mode.
If you have access to administrator mode, but do not consider yourself to be an expert on SIP and SIP
phones, we recommend that you do not change any of the technical settings since this may adversely
aect the phone’s performance or put it out of order altogether.
If you want more information on a web interface setting, click on the radio button with the question
mark that you see to the right of each item. It links to a page on snom’s Wiki with detailed information
about that particular item.
On customizing the function key settings, see the chapter "Configuring the function keys" on page
58.
Note: Any changes you make on the web interface will not take eect until you click
on "Apply" and "Save". Changes will be lost if you open another page or tab of the web
interface or if you close the web interface without first clicking on "Apply" and "Save".
Identities/accounts
The phone supports up to twelve accounts or "phone numbers" with one or more providers or within
an oce or organization network. On Snom phones these accounts or phone numbers are called
"identities".
If your phone is part of an oce network, you may need to contact your administrator to configure
new or change existing identities, as this can only be done when the phone is running in administrator
mode and when the PBX settings allow it.
See "Phone Installation and initialization" on page 8 for the information on required input data.
Configuring new identity/account
On the phone
You can do the basic setup (account/number & registrar):
1. Press
> 3 Identity > 3 Edit User.
2. Press
to scroll down.
◦ When you are at the top of the list, pressing
will take you to identity 12.
◦ At any other position within the list, press
to scroll.
3. When you have reached the identity you wish to edit, press
to select it.
4. When prompted, enter Account and Registrar.
5. Press
.