Operation Manual
Table Of Contents
- Table of Contents
- Copyright, Trademarks, Legal Disclaimers
- Important Information
- Introduction
- Setting Up
- Configuring
- Central Directory
- Firmware Update
- Web Interface Settings
17
v1.02
Admin and Installation Guide M700, M300 Setting Up
Wall or Ceiling Mounting
The M700 can be mounted under the ceiling or on the wall.
Prior to mounting the device under the ceiling or on the wall, you must remove the footstand of the
unit and connect the Ethernet cable to the RJ 45 jack on the back of the unit.
1. Press the tab (Fig. 2, arrow 1) on the footstand inward while simultaneously pulling the footstand
away from the body of the device (arrow 2).
1
2
Fig. 2 Fig. 3
2. Connect the Ethernet cable to the RJ45 jack on the back of the device (Fig. 3, above).
3. Place the cable securely in the cable guide (Fig. 3).