Operation Manual

18
v1.02
Admin and Installation Guide M700, M300 Setting Up
Wall mounting
The M700 has two holes on the back (see Fig. 1 on page 16) that can be used to hang the unit on
two screws or hooks on a wall.
NOTE: Screws/hooks and wall anchors are not included in the delivery. Use screws
and wall anchors suitable for your wall.
The separately available ceiling plate, PN 00003933, can also be used to bolt the M700
to the wall more securely than by merely hanging it on hooks or screws.
Distance to wall
Abstand zur Wand
Distance au mur
Distanza dalla parete
Distancia a la pared
Distância à parede
∼ 4 mm (0.157")
ø max: 9 mm
(0.354")
ø min: 6 mm
(0.236")
ø max
4,5 mm
(0.177")
Fig. 4
1. Mark the centers of the two holes on the wall. The centers have to be 60 mm (2.3622") apart
horizontally.
2. Drill the holes and insert the wall anchors flush to the wall.
3. Screw in the screws as shown in Fig. 4, above.
4. Place the two top holes on the back of the device (see Fig. 1 on page 16) over the screws on the
wall.
5. Gently pull the base station down on the screws until they lock into place.