Operation Manual

21
v1.02
Admin and Installation Guide M700, M300 Configuring
M300
Power is provided by the power adaptor included in the delivery.
Hardware Setup
The M300 can be placed on a desktop, a shelf, or any other flat, even surface or mounted on a wall.
Standing Unit
1. Connect the Ethernet cable to the RJ45 jack on the back of the device.
2. Connect the coaxial connector of the power adapter to the 5V DC jack on the back of the device.
Reset key - Neustart - Redémarrage -
Ripristino - Reiniciar
Reset
Ethernet 5 V DC
Reset key
Fig. 1
Wall Mounting
The M300 can be mounted on the wall by simply hanging it on two suitable hooks or screws.
NOTE: Screws and wall anchors are not included in the delivery. Use screws and
wall anchors suitable for your wall.
Distance to wall
Abstand zur Wand
Distance au mur
Distanza dalla parete
Distancia a la pared
Distância à parede
∼ 4 mm (0.16")
ø max: 8.8 mm
(0.35")
ø min: 6.8 mm
(0.27")
Fig. 2 Fig. 3
98 mm (3.86'')
Holes for wall mounting