Operation Manual

23
v1.02
Admin and Installation Guide M700, M300 Configuring
User Interface of the Unit
Fig. 1 Fig. 2
LED Status Indicator
At the front or top of the unit, depending on whether the unit is standing on a flat surface or mounted
on the wall, there is a multicolored LED for status signaling (Fig. 1 and 2). After the device is
connected to the network and to the power source, the orange LEDs will begin to blink, indicating that
the unit is booting. When the solid green LEDs come on, the unit is connected to the network and is
operational.
LED indicator System state
Solid green Operational
Blinking orange Booting
Blinking red Network or registration failure
O No power
Green, flashing rapidly Software update in progress
Reset Key
The reset key on the back of the unit is used to return the settings to factory defaults. To perform a
factory reset, press the key with a fingernail or an object like the end of a paper clip for at least 10
seconds.
Reset
Fig. 1
Status LED
Status LED