Operation Manual
Table Of Contents
- Table of Contents
- Copyright, Trademarks, Legal Disclaimers
- Important Information
- Introduction
- Setting Up
- Configuring
- Central Directory
- Firmware Update
- Web Interface Settings
31
v1.02
Admin and Installation Guide M700, M300 Central Directory
Note: The majority of the features of the emergency alarm are available on the M85
only. Pressing the OK-/Confirm key on the idle M65 for three seconds (factory setting)
will dial a call to the alarm number specified on the base station's web interface, if set.
The M25 does not have an emergency alarm.
Fig. 16
1. Open the Extensions page and click on the IPEI of the handset.
2. Select the handset's extension from the drop-down menu of Alarm line (Fig. 16).
3. Enter the phone number to be called in case of an emergency alarm in the text field of Alarm
number.
4. Select one of the configured profiles by clicking on its checkbox
5. Click on Save.
Deregistering/Deleting Handsets and/or SIP Registrations on M700
Fig. 17
• To deregister a handset, click on the checkbox to the left of the Idx and on the link Deregister
Handset(s).
• To delete a handset, click on the checkbox to the left of the Idx and on the link Delete Handset(s).
• To delete a SIP registration, click on the checkbox to the left of the VoIP Idx and on the link SIP
Delete Extension(s).