Operation Manual

Table Of Contents

v1.02

Admin and Installation Guide M700, M300 Firmware Update

Fig. 8

Upon successful registration, the State of the Extension page should now be listed as SIP registered

(Fig. 9).

Fig. 9

Note: You also have to register the handset from the handset itself (Settings menu >

Connectivity > Register). Please consult the handset manual for further information.

Selecting Emergency Alarm Setting on M300

If emergency alarm settings are available, you can select one of the conﬁgured proﬁles for each

handset registered at the base station. Emergency alarm settings: See "Alarm" on page 34.

Note: All features of the emergency alarm settings are available on the M85 only.

The M65 can be enabled to send an alarm call to the speciﬁed alarm number using the

factory settings. The M25 does not have an emergency alarm.

1. Open the Extensions and Handsets page, click on Handset (see Fig. 2) and then on the IPEI of the

handset.

2. Select the handset's extension from the drop-down menu of Alarm line.

Fig. 10

3. Enter the phone number to be called in case of an emergency alarm in the text ﬁeld of Alarm

number.