Operation Manual

45
v1.02
Admin and Installation Guide M700, M300 Firmware Update
LDAP
On the Central Directory page, select LDAP from the drop-down menu of Location (see Fig. 1 on page
41) to open the LDAP server menu (Fig. 1, below). After saving your input, you may want to reboot
the base station to make sure that the changes take eect.
Fig. 1 Fig. 2
Settings:
• Server: IP address of the LDAP server
• Port: Server port for LDAP
• Sbase: This setting specifies the LDAP search base (the distinguished name of the search
base object) which corresponds to the location in the directory from which the LDAP search is
requested to begin. The criteria depend on the configuration of the LDAP server.
• LDAP Filter: LDAP name filter is the search criteria for name look-ups. The format of the search
filter is compliant to the standard string representations of LDAP search filters (RFC 2254). The
default value is blank.
• Bind: Specifies the bind "username" for LDAP servers when the handset connects to the server. If
the server allows anonymous binds, you can leave the setting blank.
• Password: Specifies the bind "password" for LDAP servers. If the server allows anonymous
binds, you can leave the setting blank.
• Handset identity settings.
◦ Name: Select the LDAP name attribute from the drop-down menu. The options are cn and
sn+givenName. The default setting is cn.
◦ LDAP number attributes: The attributes telephoneNumber, mobile, and homephone are
preset.