Operation Manual
Table Of Contents
- Table of Contents
- Copyright, Trademarks, Legal Disclaimers
- Important Information
- Introduction
- Setting Up
- Configuring
- Central Directory
- Firmware Update
- Web Interface Settings
50
v1.02
Admin and Installation Guide M700, M300 Firmware Update
Web Interface Settings
Home/Status
The Home/Status page contains the summary of current operating condition and the settings of
the base station and the handsets registered at the base station. It also contains the buttons for
rebooting the base station.
Fig. 1
Description of information on this page:
• System information: This base station's current multicell state (disabled, primary base station in
multicell installation, secondary base station in multicell installation).
Fig. 2
• Phone type: IP DECT
• System type: Custom configuration, if any. Default: Generic SIP (RFC 3261)
• RF band: Depending on location (EU, US, LATAM)
• Current local time
• Operation time: Counter - time elapsed since last reboot of base
• RFPI address: RFPI: The Radio Fixed Part Identity is a unique identifier frequently transmitted by
the base station.