Operation Manual

Table Of Contents

v1.02

Admin and Installation Guide M700, M300 Firmware Update

• MAC address: The media access control (MAC) address is a unique identiﬁer assigned by the

manufacturer.

• IP address: The Internet Protocol address assigned by the network the base station is located in.

• Firmware version:

• Firmware URL: The address of the server from which ﬁrmware updates can be downloaded.

• Base station status: In use or Idle

• SIP identity status on this base station. This is the status of the handsets registered and currently

present at this base station. Note: Handsets that are currently turned o are not shown; you can

still view them on the Extensions page, showing their state as "detached". Error messages may

dier, depending on the setup of your PBX.

• Reboot button: Clicking on this button will initiate a reboot as soon as the base station is idle, i.e.,

when there are no current calls, handsets accessing the directory, or ongoing ﬁrmware updates.

• Forced reboot button: Clicking on this button will initiate an immediate reboot; active calls,

ﬁrmware updates, and directory access from all handsets will be terminated immediately.

Fig. 3

Extensions

This page has three subpages, Add Extension, Edit Extension, and Handset. Setting up extensions

and registering handsets to extensions: See "Extensions" on page 51 .

Note:

◦ An extension/identity can only be assigned to one handset in your single-cell or multicell

installation. Do not try to register more than one handset for an extension.

◦ Each handset will only support one identity per SIP server, regardless whether the servers

are in your oce network or provided externally by an IP provider.

Fig. 1

Extensions page settings

Setting Description

Idx Index of handsets. Handsets are numbered consecutively by the base station.

With checkbox for registering handsets at and deregistering or deleting them

from the base station.

IPEI International Portable Equipment Identiﬁer for DECT handsets which is unique

worldwide. It consists of the equipment manufacturer code (EMC) and a

portable serial number (PSN) issued by the manufacturer.