Operation Manual

54
v1.02
Admin and Installation Guide M700, M300 Firmware Update
Setting Description
Forwarding Unconditional Number On/o. All incoming calls for this extension will be forwarded to the
number entered in the text field. Note: This setting (both the number and
the enabled/disabled status) can be changed from the handset registered
to the extension.
Defaults: Empty number field, status disabled
Forwarding No Answer Number On/o. Incoming calls for this extension will be forwarded to the number
entered in the text field if not picked up after the number of seconds
entered in the adjacent field. Note: This setting (both the number and the
enabled/disabled status) can be changed from the handset registered to
the extension.
Defaults: Empty number field, status disable
Forwarding on Busy Number On/o. Incoming calls for this extension will be forwarded to the number
entered in the text field when the line is busy. Note: This setting (both
the number and the enabled/disabled status) can be changed from the
handset registered to the extension.
Defaults: Empty number field, status disable
Handset (Mxx)
Click on the IPE identifier or the place holder FFFFFFFFFF to open the subpage.
Fig. 4
Fig. 5 Fig. 6
Parameter descriptions for Handset subpages:
Setting Description
Location In multicell installations, select from drop-down menu if more than one base-
station available
IPEI To find the IPEI, open the Settings menu of the handset, select Status, and
scroll down to the IPEI at the end of the handset status. The IPEI consists of a
string of 10 decimals and capital letters. Do not enter the colons grouping the
characters of the string into twos.