Operation Manual

55
v1.02
Admin and Installation Guide M700, M300 Firmware Update
Setting Description
AC This is the access code for registering the handset at the base station.
The default is 0000 (four times zero). NOTE: This access code is not to be
confused with either the PIN for resetting the handset to factory values or
for deregistering it from the base station (default also 0000) or the PIN for
accessing the mailbox.
Alarm Line M85/M65. This is the extension number the handset is registered for.
Alarm Number M85/M65. This is the phone number the handset will call when the
emergency alarm button is pressed.
Servers
On this page you add and remove SIP/NAT servers, select the server the base station should connect
to, and change the default settings.
Fig. 1
Parameter descriptions:
Setting Description
Server Alias Server alias. Default: empty.