Operation Manual

11
v1.05
Provisioning Guide M700, M300 Settings and Configuration
Global Settings
Setting Value(s) Description
tone_scheme = AUS
1 = New South Wales
2 = Victoria
3 = Tasmania
4 = Australian Capital
Territory
5 = South Australia
6 = Northern Territory
7 = Queensland
8 = Western Australia
web_language English, Dansk, Italiano,
Türkce, Deutsch, Português,
Slovenian, Dutch, Francais,
Español, Russian
This setting defines the language used in the web
interface of the base station.
Default Value: English
language English, Español, Deutsch,
Francais, Italiano, Dutch,
Português, Dansk, Svenska,
Turkce, Polski, Russian,
Norsk, Slovenian, Čeština,
Suomi, blank (controlled by
handset)
This setting defines the language usedon the
handset.
Default Value: English
min_jittbuf_depth 0-255 Controls the minimum jitter buer depth.
Default Value: 2
max_jittbuf_depth 0-255 Controls the maximum jitter buer depth.
Default Value: 7
ac_code e.g. 1234 Defines the 4-digit code for a handset to connect
to and register with the selected base station.
Changing the code for a handset that is already
registered will have no eect.
Default Value: 0000
network_sip_log_server e.g. 192.168.1.2 Specifies a server to send logged SIP messages to.
Default Value: <empty>
phonebook_reload_time e.g. 10 Phonebook reload time in (s) if phonebook_server_
location = 0.
Default Value: <empty>
phonebook_server_
location
0 = Local
1 = LDAP
2 = XML
Defines what type of phonebook is used.
Default Value: 0
phonebook_location http://192.168.1.2/
directory/
Specifies the location of the phonebook if
phonebook_server_location = 0. Setting has to be
used in conjunction with phonebook_filename.
Default Value: <empty>
phonebook_filename e.g. phonebook.xml Filename of the phonebook if
phonebook_server_location and phonebook_location
have been set.
Default Value: <empty>
Note: In addition to the AC, the handset has a PIN for deregistering it from the
base, performing factory resets, etc. The default value of the PIN is also 0000;
it can only be changed on the handset itself. The PIN cannot be set or altered
from the base station, whether by provisioning or via the web user interface.