Operation Manual

12
v1.04
Provisioning Guide M700, M300 Settings and Configuration
Global Settings
Setting Value(s) Description
setting_server e.g. http://www.company.
com/settings/snom_m700.
xml
An URL specifying the location from where to load
the settings file. If the tag is read and if it is dierent
from what’s already stored, the provisioning logic
will restart, using the new value as base.
The {mac} macro is supported in the URL.
Default Value: <empty>
pnp_config o / on Enable/disable PNP provisioning.
Default Value: on
dhcp_option_pnp o / on Enable/disable DHCP provisioning.
Default Value: on
sip_conf_key_dtmf_
string
This string specifies the DTMF that is sent via SIP
when the conf key is pressed. Not applicable to all
configurations.
Default Value: <empty>
sip_r_key_dtmf_string This string specifies the DTMF that is sent via SIP
when the R key is pressed. Not applicable to all
configurations.
Default Value: <empty>
dialplan_enabled o / on Specifies whether the configured dial plan is enabled
or not.
Default Value: o
dialplan_maxlength e.g. 6 Specifies the maximum length of a number up to
which no dialplan_prefix will be added.
Default Value: <empty>
dialplan_prefix e.g. 030 Specifies the prefix that is added when the dialed
number is longer than dialplan_maxlength.
Default Value: <empty>
sip_stun_bindtime_
determine
o / on If STUN is enabled and sip_stun_bindtime_guard
is defined, setting this to 1 forces the base to
automatically determine the duration of NAT bindings
in the system. In this case, sip_stun_bindtime_guard
defines the initial test duration.
Default Value: on
sip_use_dierent_ports o / on If this is enabled, network_id_port specifies the
source SIP port used for the first instance, and all
following will use succeeding ports. If disabled, the
same port will be used for all accounts.
Default Value: o
timezone_by_country_
region
o / on Sets the time zone by country/region.
Default Value: on
dst_by_country_region o / on Sets the DST by country/region.
Default Value: on
voip_sip_auto_upload o / on Enables / disables the automatic upload of SIP log
files.
Default Value: o
web_inputs_allowed o / on If the base is configured via configuration files, this
setting can be used to allow/disallow the possibility
to edit the configuration directly on the web server.
Default Value: on