Operation Manual

13
v1.04
Provisioning Guide M700, M300 Settings and Configuration
Global Settings
Setting Value(s) Description
auto_dect_register o / on Enable/disable the automatic DECT registration of
handsets.
Default Value: on
sip_stun_bindtime_
guard
e.g. 80 If STUN is enabled, this value specifies in seconds
how often the system will guard the NAT bindings.
Default Value: 80
network_sntp_
broadcast_enable
o / on Enables reception of SNTP broadcasts from an SNTP
server and thereby syncing with the received server
time.
Default Value: on
ldap_name_attributes e.g. cn This setting can be used to specify the “name”
attributes of each record which are to be returned in
the LDAP search results.
Default Value: <empty>
ldap_search_filter LDAP name filter is the search criteria for name look
ups. The format of the search filter is compliant to
the standard string representations of LDAP search
filters (RFC 2254).
Default Value: <empty>
ldap_server e.g. 192.168.10.1 This setting refers to the DNS name or IP address of
the LDAP server.
Default Value: <empty>
ldap_port e.g. 389 This setting specifies the port of the LDAP server.
Default Value: <empty>
ldap_base e.g. ou=snom.com -
users,dc=snom,dc=com
This setting specifies the LDAP search base (the
distinguished name of the search base object) which
corresponds to the location in the directory from
which the LDAP search is requested to begin.
Default Value: <empty>
ldap_username This setting specifies the bind “Username” for LDAP
servers. Most LDAP servers allow anonymous binds,
in which case the setting can be left blank.
Default Value: <empty>
ldap_password This setting specifies the bind “Password” for LDAP
servers. This setting can be left blank in case the
server allows anonymous binds.
Default Value: <empty>
ldap_virtuel_lists 1 - on
0 - o
This setting enables the use of virtual lists. If set
to 1, virtual lists are used. If set to 0, the use of
virtual lists is disabled, and the bvase will request
a maximum of 50 hits. (Note: "virtuel" is misspelt
in the name of the setting. Please use as is until
further notice.
Default Value: 1
ldap_work_number e.g. telephoneNumber Default Value: telephoneNumber
ldap_mobile_number e.g. mobile Default Value: mobile
ldap_home_number e.g. homePhone Default Value: homePhone
http_user e.g. admin Defines the HTTP username for your base station.
Together with http_pass it will protect your web
interface.
Default Value: admin