Operation Manual

15
v1.05
Provisioning Guide M700, M300 Settings and Configuration
Global Settings
Setting Value(s) Description
stun_binding_interval e.g. 90 If STUN is enabled, stun_binding_interval defines
how often (in seconds) keepalive are sent in order to
keep NAT bindings. If sip_stun_bindtime_determine
is set, stun_binding_interval will be overruled and
keep-alives will be sent with a frequency of half the
determined bindtime.
Default Value: 90
enable_rport_rfc3581 o / on Enables or disables rport parameter for the Via
header field. The default setting allows a client to
request that the server send the response back
to the source IP address and port from which the
request originated.
Default Value: on
syslog_server e.g. 10.0.0.1 IP address of the syslog server.
Default Value: <empty>
syslog_server_port e.g. 514 Port of the syslog server.
Default Value: 514
tls_server_
authentication
o / on Enable / disable TLS server authentication.
Default Value: o
stun_server e.g. stun.snom.com This setting refers to the DNS name or IP address of
the STUN server.
Default Value: empty
codec_tos 0-255 This option enables the phone to support quality of
service (QOS) for RTP trac in a network.
Default Value: 160
signaling_tos 0-255 This option enables the phone to support quality of
service (QOS) for SIP trac in a network.
Default Value: 160
log_level -1 = o
6 = normal
8 = system
7 = debug
This setting defines the log level of the syslog
messages that are logged.
Default Value: 6
dst_enable o / on / auto Specifies whether or not to apply DST changes to
display time.
Default Value: auto
dst_fixed_day_enable o = Use month and date
on = Use month and day of
week
Specifies whether or not to use a fixed day of the
week when applying DST changes.
Default Value: o
dst_start_month 1-12 Specifies the month in which DST begins.
Default Value: 3
dst_start_date 1-31 Specifies the day of the month on which DST begins.
Default Value: 0
dst_start_time 0-23 Specifies the time when DST begins.
Default Value: 2
dst_start_day_of_week 1 = Sunday
2 = Monday; 3 = Tuesday
4 = Wednesday
5 = Thursday; 6 = Friday
7 = Saturday
Specifies the day of the week on which DST begins.
Default Value: 1