Operation Manual

18
v1.05
Provisioning Guide M700, M300 Settings and Configuration
Server Settings
Setting Value(s) Description
session_timer
idx=1-10
e.g. 3600 If timer_support is enabled, this option specifies
the SIP session timer in seconds.
Default Value: 3600
user_expiry
idx=1-10
e.g.
3600 Specifies the maximum time between SIP re-
registrations in seconds.
Default Value: 3600
keepalive_interval
idx=1-10
o / on Specifies whether k
eepalive message will be sent
out to the registrar/proxy port in order to have the
port stay open and the phone remain reachable.
Default Value: on
user_hold_inactive
idx=1-10
o / on Specify if y
ou want to indicate a hold request with
sdp parameter send-only or inactive. Some pbx's
need the inactive setting for proper music-on-hold
operation.
Default Value: o
user_host idx=1-10 e.g. server.snom.com Specifies the IP or DNS address of the registrar/
proxy where you want to register this account.
Default Value: <empty>
user_outbound
idx=1-10
e.g. 10.110.24.111:5060 Specify the outbound proxy in this field (format:
addr:port) to ensure all SIP packets are sent via
the specified communication point.
Default Value: <empty>
user_srtp
idx=1-10
o / on Enables/disables encryption of outgoing audio
R
TP streams. This setting has to be enabled if
srv_srtp_auth is set to on. Likewise this has to be
turned o when srv_srtp_auth is o.
Default Value: o
user_full_sdp_answer
idx=1-10
o / on When the setting is turned o, the base returns a
list of all available codecs in the SDP in response
to INVITE requests.
Default Value: o
codec_priority_list
idx=1-10
pcmu, pcma, g729, g722,
g726
Prioritize which codecs the base should use.
Prioritized comma-separated list with max. of 5
entries, most desired codec up front.
Default Value: pcmu, pcma, g726
codec_size
idx=1-10
20, 30, 40, 60 Specifies the packet size in ms for the respective
codec.
Default Value: 20
conferencing
idx=1-10
e.g. conferencing.snom.com This setting specifies the address or FQDN of a
conference server.
Default Value: <empty>
user_auth_tag
idx=1-10
on = AES-32
o = AES-80
When the setting is set to on, the base oers an
AES-32 auth-tag for SRTP. If turned o, AES-80 is
used.
Default Value: on
srv_att_transfer_2nd_
call_on_hold
idx=1-10
o / on Specifies the attended transfer behaviour of the
base. If turned on, the second call will be put on
hold. If turned o, the second call is not put on
hold.
Default Value: on