Operation Manual

20
v1.05
Provisioning Guide M700, M300 Settings and Configuration
Extension Settings
Setting Value(s) Description
subscr_ua_data_
emergency_number
idx=1-200
e.g. 112
Specifies the emergency number for this handset.
Only one number is allowed!
Default Value: <empty>
rtp_collision_control o / on
This setting controls whether the base checks for
RTP collision. RTP collision means that the device
is receiving RTP packages from more than one
source address with same SSRC.
Default Value: o
subscr_sip_line_name
idx=1-200
e.g. Line1
Specifies the line name for the respective
extension on this handset.
Default Value: <empty>
call_waiting
idx=1-200
on / visual / ringer / o
Enables/disables call waiting indication on the
handset.
Default Value: on
user_name
idx=1-200
Specifies the account with which you register to a
SIP registrar/proxy.
Default Value: <empty>
user_active
idx=1-200
o / on
The specific account can be disabled by disabling
this option. This means that the identity is no
longer registered.
Default Value: o
user_pname
idx=1-200
Specifies the user name that is used for
authentication.
Default Value: <empty>
user_pass
idx=1-200
Specifies the password to be used for challenge
responses.
Default Value: <empty>
user_mailbox
idx=1-200
e.g. snom mailbox
Specifies the name for the mailbox that is
associated with the particular SIP identity.
Default Value: <empty>
user_mailnumber
dx=1-200
e.g. [e-mail]
Specifies the number for the mailbox that is
associated with the particular SIP identity.
Default Value: <empty>
user_realname idx=1-
200
e.g Max Mustermann
Set the name that is associated with each line. This
information is also sent out to any party you are
calling.
Default Value: <empty>
fwd_all_enabled idx=1-
200
o / on
If turned on, all calls to the associated identity are
diverted to the number specified.
Default Value: o
fwd_all_target idx=1-200 e.g. 123456
Specifies the redirection target when redirection is
always active.
Default Value: <empty>
fwd_time_enabled idx=1-
200
o / on
If turned on, any incoming call will be diverted to
the specified number after the specified time has
elapsed.
Default Value: o
fwd_time_target idx=1-
200
e.g. 123456
Specifies the redirection target when redirection
after time is active.
Default Value: <empty>