Operation Manual

25
v1.04
Provisioning Guide M700, M300 Settings and Configuration
Multicell Settings
Setting Value(s) Description
network_auto_multi_
primary
o / on This setting specifies whether auto configuration is
enabled/disabled for multiple primaries in a chain.
Default Value: o
network_allow_multi_
primary
o / on This setting specifies whether the configuration of
multiple primaries in a chain is allowed or not.
Default Value: o
network_dect_auto_
sync_tree_config
o / on Specifies whether the DECT sync tree is
automatically configured or not.
Default Value: on
network_sync_debug_
enable
o / on Specifies whether the network sync debug is enabled
or not.
Default Value: o
network_roaming_
deregister
o / on This setting specifies how SIP registrations are
handled when a handset roams from one base
station to another.
Roaming is defined as the procedure when the
handset moves its SIP and DECT registration from
one base station to another. Some PBXs are capable
of handling multiple SIP bindings per SIP user and,
consequently, when a new SIP registration is made
from a dierent base, the old SIP registration will
still be valid. As a consequence, this registration has
to be deactivated.
Other PBXs always use the latest SIP registration
and therefore no deregister is needed.
"O" means that no sip deregister takes place when
a handset roams from one base to another, while
"on" means that the old SIP registration is deleted
when a handset roams from one base to another.
Default Value: o
network_sync_enable o / on Specifies whether multicell mode is enabled or not.
Default Value: o
network_sync_data_
transport
multicast / peer-to-peer Specifies the data transport method for multicell
setups.
Default Value: <empty>