Operation Manual

28
v1.04
Provisioning Guide M700, M300 Settings and Configuration
Examples for Configuration Files
The following six examples of configuration files show how setting files are configured. Please
remember that these setting files are only meant to be guidelines; every value within each tag has
to be changed, if needed. All configuration files must be saved in ANSI format to avoid any problems
with the encoding of certain characters.
Basic Configuration 1: 1 handset, 1 base station
Basic Configuration 2: 3 handsets, 1 base station, SRTP & TLS on, German language used on all
devices
Basic Configuration 3: 1 handset, 1 base station, two dierent lines and a dierent access code
Basic Configuration 4: 1 handset, 1 base station, phonebook included in settings file
Basic Configuration 5: Allows the inclusion of both firmware and phonebook-related settings in
the provisioning process. Each file contains specific settings and is loaded
separately, avoiding any root tag conflicts. The file will automatically check
for and fetch the latest build of any given firmware release whenever the
base is provisioned.
Multicell Configuration (M700 only): Example for multicell provisioning, two (2) base stations