ENGLISH Quick Start Guide DEUTSCH FRANÇAIS ITALIANO ESPAÑOL
© snom technology AG 2009 v.101 snom technology AG Charlottenstr. 68-71 10117 Berlin Germany www.snom.
ENGLISH ............................................................................................... 5 DEUTSCH ............................................................................................. 21 FRANÇAIS ............................................................................................ 39 ESPAÑOL .............................................................................................. 57 ITALIANO .........................................................................
E N G L I S H snom PA1 Quick Start Guide 4
E snom PA1 Quick Start Guide N This is the quick start guide to the installation, setup, and operation of the snom PA1, an announcement system designed for easy access via web interface. The PA1 reduces installation time and creates a secure and centralized announcement network.
E N G L I S H snom PA1 Quick Start Guide Copyright, Trademarks, GPL, Legal Disclaimers © 2009 snom technology Aktiengesellschaft All Rights Reserved. snom, the names of snom products, and snom logos are trademarks owned by snom technology AG. All other product names and names of enterprises are the property of their respective owners.
E snom PA1 Quick Start Guide N Our firmware includes some source code that may be used and modified by anyone and everyone under the GNU Public License (GPL) (see Appendix on page Seite 92), provided they, in turn, make it available to everyone else with the same licensing agreement. Please go to http://www.snom.com/ en/support/download/gpl-quellcode/ for the original GPL license and the source code of components licensed under GPL and used in snom products.
E N G L I S H snom PA1 Quick Start Guide Important Information Please read the instructions on safety and disposal and on how to set up and use the device before using it and also give them to other users to read or inform those users of their contents. Save this manual and do not give the device to third parties without it. Safety Instructions • • • • • • ollow the instructions in this manual and other applicable documentatiF on of the device.
E snom PA1 Quick Start Guide N G L I S H circuits. LAN ports contain SELV circuits, and PSTN ports contain TNV circuits. Some LAN and PSTN ports both use RJ-45 (8P8C) connectors. Use caution when connecting cables. Standards conformance This device is CE and FCC-certified and meets European and US health, safety, and environmental standards. Unauthorized opening, changing, or modifying the device will cause the warranty to lapse and may also result in the lapse of the CE and FCC certifications.
E N G L I S H snom PA1 Quick Start Guide Wall mounting Note: The Ethernet cable must not be bent to avoid damage and loss of the network connection. We recommend that you place the PA1so that the PoE connector is facing toward the LAN port in your network. 1. Use the template to mark the positions of the holes to be drilled in the wall. 2. Drill the holes and insert the expansion anchors in the holes. 3. Place the PA1on the wall with the cut-outs above the anchors as shown in Fig. 1. 4.
E snom PA1 Quick Start Guide N Connecting the PA1 1. lug the Ethernet cable into the RJ45 connector labelled "Port 1POE", P as shown in Fig. 2. The second RJ45 connector labelled "Port 2" is for daisy-chaining further Ethernet devices without the need for another Ethernet cable. I f no PoE available: Connect a snom-approved 5 V 10 W power adapter to the power connector labelled "5V DC". 2. Connect the loudspeaker wires to the speaker terminals labelled "Speaker", as shown in Fig. 3. a.
E N G L I S H snom PA1 Quick Start Guide Status of PA1 Red LED Green LED Booting up (for a short time) On Off Sending DHCP request Blinking Off On Off On On Account registered Off On In call Off Blinking Updating firmware On Off with DHCP without DHCP IP address & other network-related settings received from server PA1 uses default IP address & netmask Start-up complete, web interface available Open web interface with default IP address Obtain network IP address and netmask from a
E snom PA1 Quick Start Guide N G L I S H Configuration With DHCP The snom PA1 has a built-in DHCP client. When DHCP is available in the network, the PA1 will initialize automatically. 1. The red LED begins to blink. The PA1 is sending the DHCP request. 2. After the PA1 has received an IP address and other network-related settings (netmask, IP gateway, DNS server, etc.) from the DHCP server, the red LED stops blinking and glows red steadily. 3.
E N G L I S H snom PA1 Quick Start Guide red power LED is blinking. 3. After the reset (or the aborted DHCP client setup) the PA1 will use the default network settings: IP address: 192.168.0.2 N etmask: 255.255.0.0 The red LED stops blinking and glows red steadily. 4. When the PA1 boot up process is finished and the web interface is available, the green LED lights up. 5.
E snom PA1 Quick Start Guide N G L I S H 12. D evice will save new settings and restart. When the start-up with the network settings is complete, the red and the green LED will both be glowing steadily. 13. Continue with "Logging on an account". NOTE: P ress the "IP/Reset" button briefly to hear the current IP Address of the snom PA1 (in English) over the connected loudspeaker or in the headset.
E N G L I S H snom PA1 Quick Start Guide Settings Normally, it is only necessary to set the timezone and the tone scheme and to adjust the loudspeaker volume and amplifier gain as necessary. Setting Time Zone 1. Web interface > Advanced > Network > Behavior > Time > Timezone. 2. Select your country/city from the drop-down list. 3. Click on "Save". Setting Tone Scheme 1. Web interface > Preferences > General Information > Tone Scheme. 2. Select your country from the drop-down list. 3. Click on "Save".
E snom PA1 Quick Start Guide N G L I S H Software update Automatically 1. 2. 3. 4. Web interface > "Advanced" setup > "Update" tab. Select update policy from the list box. Enter the settings server's URL in the "Setting URL" text field. Change the default settings of "Settings refresh timer", "Subscribe Config", and "PnP Config", if necessary. 5. Click on "Reset". Manually 1. Web interface > "Advanced" setup > "Update" tab. 2.
E N G L I S H snom PA1 Quick Start Guide Standard feature list • • • • • • • • • • • • • 18 IEEE 802.3af PoE compliant, Class 3 2 port 10/100Mb Ethernet switch SIP or multicast support Remote SW update Network/web management Remotely settable speaker volume adjustment Push-on speaker terminals Class D 4W power amplifier (loudspeaker not included) IP address/reset button Call/network activity indicator One "MIC in" and one "LINE out" 3.
E snom PA1 Quick Start Guide N Not included: BSP (board support package) for further software development. If you are interested in this package, please talk to your vendor.
snom PA1 Quick Start Guide D E U T S C H 20
snom PA1 Quick Start Guide Dies ist der Quick Start Guide zur Aufstellung, Einrichtung und Inbetriebnahme des Durchsage-Systems snom PA1. Durch den Webbrowser des snom PA1, der den einfachen Zugriff auf das Gerät ermöglicht, wird die Installationszeit auf ein Minimum reduziert und ein sicheres und zentralisiertes Durchsage-Netzwerk geschaffen.
snom PA1 Quick Start Guide Copyright, Markenrechte, GNU/GPL-Lizenz, Haftung © 2009 snom technology Aktiengesellschaft D E U T S C H Alle Rechte vorbehalten. snom sowie die Namen der snom-Produkte und die snom logos sind gesetzlich geschützte Marken der snom technology AG. Alle anderen Produkt- und Firmennamen sind Marken der jeweiligen Inhaber.
snom PA1 Quick Start Guide Vorsatz oder grober Fahrlässigkeit auf Seiten von snom beruhen oder sofern keine Haftung aufgrund zwingender gesetzlicher Bestimmungen eintritt. Unsere Firmware enthält teilweise Quellcodes, die unter der GNU Public License (GPL) (siehe Anhang auf Seite 92) von jedermann genutzt und modifiziert werden dürfen, solange sie wiederum mit denselben Lizenzbedingen zur allgemeinen Nutzung veröffentlicht werden.
snom PA1 Quick Start Guide Wichtige Hinweise D E U T S C H Lesen Sie bitte vor Inbetriebnahme die Sicherheitshinweise und die Bedienungsanleitung. Lassen Sie sie auch von den Mitbenutzern des Gerätes lesen oder informieren Sie sie über deren Inhalt. Bewahren Sie diese Bedienungsanleitung auf und geben Sie das Gerät nur mit der Bedienungsanleitung an Dritte weiter. Sicherheit • • • • • • 24 efolgen Sie die Anweisungen in dieser Bedienungsanleitung und in B der sonstigen Dokumentation des Geräts.
snom PA1 Quick Start Guide SELV (Safety Extra Low Voltage)-Einhaltung Die Eingangs-/Ausgangsverbindungen halten die SELV-Richtlinien für Kleinspannungsgeräte ein. Warnung: Um elektrische Schläge zu vermeiden, verbinden Sie keine SELV-Geräte mit Geräten, die Telefon-/Netzwerk-Spannung (TNV) führen. Nur an LAN-Ports anschließen! D E U T S C H Normkonformität Dieses Gerät ist CE- und FCC-geprüft und entspricht den geltenden europäischen und US-amerikanischen Richtlinien.
snom PA1 Quick Start Guide Entsorgung des Produktes Dieses Gerät unterliegt der europäischen Richtlinie 2002/96/ EG und darf nicht im Hausmüll entsorgt werden. D E U T S C H Die getrennte Sammlung und sachgemäße Entsorgung von Elektro- und Elektronikgeräten dienen der Vermeidung von möglichen Umwelt- und Gesundheitsschäden sowie der umsichtigen und rationellen Verwendung und Wiederverwendung von Ressourcen.
snom PA1 Quick Start Guide Wandbefestigung Bitte beachten: Das Ethernet-Kabel darf nicht geknickt werden, um eine Beschädigung und den Verlust der Netzwerkverbindung zu vermeiden. Wir empfehlen, das PA1so anzubringen, dass die PoE-Buchse dem LAN-Port zugewandt ist. 1. Benutzen Sie die Schablone, um die Positionen der Dübellöcher auf der Wand zu markieren. 2. Bohren Sie die Löcher und setzen Sie die Dübel ein. 3. Platzieren Sie das PA1 - wie in Abb.
snom PA1 Quick Start Guide Das PA1 anschliessen 1. D E U T S C H chließen Sie das Ethernet-Kabel, wie in Abb. 2 gezeigt, an die mit S "Port 1POE" beschriftete RJ45 Anschlussbuchse an. Die zweite, mit "Port 2" beschriftete Buchse dient der Aneinanderkettung weiterer Netzwerkgeräte, ohne dass eine zweite Netzwerkverbindung erforderlich ist.
snom PA1 Quick Start Guide Status des PA1 Rote LED Grüne LED Fährt hoch (für kurze Zeit) An Aus Sendet DHCP-Request Blinkt Aus An Aus An An Account/Konto registriert Aus An Im Gespräch Aus Blinkt Firmware-Update findet statt An Aus mit DHCP D E U T S C H ohne DHCP IP-Addresse & andere Netzwerk-Einstellungen vom Server erhalten PA1 benutzt voreingestellte IP-Adresse & Netzmaske Start-up beendet, Webbrowser aufrufbar Webbrowser mit voreingestellter IP-Adresse öffnen Netzwerk-IP-Adre
snom PA1 Quick Start Guide Konfiguration Mit DHCP D E U T S C H Das snom PA1 hat einen eingebauten DHCP-Clienten. Wenn DHCP im Netzwerk zur Verfügung steht, erfolgt die Initialisierung des PA1 automatisch. 1. Die rote LED beginnt zu blinken - das PA1 sendet den DHCP-Request. 2. Nachdem das PA1 die IP-Adresse und andere netzwerkbezogene Einstellungen (Netzmaske, IP Gateway, DNS-Server, etc.) vom DHCP-Server erhalten hat, hört die rote LED auf zu blinken und leuchtet ununterbrochen rot. 3.
snom PA1 Quick Start Guide Netzwerkeinstellungen lassen Sie sich bitte von Ihrem Administrator geben. 1. Die rote LED beginnt zu blinken - das PA1 sendet den DHCP-Request. 2. Wenn Sie die Einrichtung des DHCP-Clienten überspringen wollen (es kann einige Minuten dauern, bis das PA1 den Vorgang abbricht), drücken Sie auf die Taste "IP/Reset", während die rote, mit "Power" beschriftete LED blinkt. 3.
snom PA1 Quick Start Guide D E U T S C H 4. 5. 6. 7. 8. voreingestellten Wert durch die Netzwerk-Netzmaske. c. Nehmen Sie, falls erforderlich, andere Änderungen vor. Klicken Sie auf "Save" unten auf der Seite. Die Frage "Apply setting changes?" erscheint oben auf der Seite. Klicken Sie auf "Reboot". Sie werden erneut aufgefordert, den Neustart zu bestätigen: "Reboot?". Klicken Sie auf "Yes". Das Gerät speichert die neuen Einstellungen und startet neu.
snom PA1 Quick Start Guide "Login" . 2. Tragen Sie die für Ihr Netzwerk erforderlichen Angaben ein: a. Account: Name/Telefonnummer. b. Password: Das Kennwort Ihres Accounts/Kontos. c. Registrar: Die Adresse des Registrars Ihrer Telefonanlage. 4. Klicken Sie auf "Save" und "Re-Register". Wenn die Registrierung erfolgreich war, leuchtet die grüne, mit "Call" beschriftete LED auf, die rote, mit "Power" beschriftete LED schaltet sich aus. Ihr snom PA1 ist jetzt betriebsbereit.
snom PA1 Quick Start Guide D E U T S C H 2. L autstärke. Textfeld nach "Speaker Volume": Geben Sie eine Zahl von 1 (niedrig) und 14 (hoch) ein. Die Voreinstellung ist 10. 3. Verstärkungsfaktor. Texfeld nach "Amplifier gain": Geben Sie die 0 oder die 1 ein. Die Voreinstellung ist 1. 4. Klicken Sie auf "Save". Die Bedienung des snom PA1 Wählen Sie auf Ihrem Telefon die Nummer des PA1.
snom PA1 Quick Start Guide 3. "PnP Config": Klicken Sie auf den Radiobutton "off". 4. Geben Sie im Textfeld nach "Upload Setting file manually" die URL der Firmware ein. 5. Klicken Sie auf "Load". Das PA1 startet neu. Die rote LED leuchtet auf, die grüne LED schaltet sich aus. Der Update ist beendet, wenn beide LEDs anfangen zu blinken. VORSICHT: Wird die Stromzufuhr des Gerätes während des Updates (rote LED an, grüne LED aus) unterbrochen, wird die Firmware beschädigt und das PA1 funktionsunfähig.
snom PA1 Quick Start Guide Standardmerkmale D E U T S C H • • • • • • • • • • • • • 36 Konform mit IEEE 802.
snom PA1 Quick Start Guide Nicht in der Lieferung enthalten: BSP (Board Support Package) für die weitere Softwareentwicklung. Wenn Sie sich für dieses Package interessieren, wenden Sie sich bitte an Ihren Händler.
snom PA1 Quick Start Guide F R A N Ç A I S 38
snom PA1 Quick Start Guide Voici le Quick Start Guide (guide de démarrage rapide) pour l'installation, l'initialisation, et l'emploi du snom PA1, un système de sonorisation et gestion d’annonces. Accédez le snom PA1 facilement par interface web et réduisez le temps d'installation tout en créant un système d'annonces sécurisé and et centralisé.
snom PA1 Quick Start Guide Copyright, Marques Déposées, GPL, Non Responsabilitée © 2009 snom technology Aktiengesellschaft Tous droits réservés. snom, les noms des produits snom et les logos snom sont des marques déposées par snom technology AG. Tous les autres noms de produits et noms d'entreprises sont les propriétés de leurs détenteurs respectifs.
snom PA1 Quick Start Guide négligence flagrante de la part de snom ainsi que des les cas ou la responsabilité de snom est engagée de par la loi. Notre firmware inclus des éléments de code source qui peuvent être utilisés et modifié par quiconque selon les termes des licences GPL (cf. la page 92), à condition qu'à leurs tours ils les rendent disponibles selon les mêmes termes. Veuillez vous rendre sur http://www.snom.
snom PA1 Quick Start Guide Informations importantes Veuillez lire les informations concernant la sécurité et la mise au rebut de l'appareil ainsi que celles concernant son installation et son utilisation avant d'utiliser l'appareil. Communiquez également ces informations aux autres utilisateurs ou faites-les leur lire. Conservez ce manuel et ne cédez pas l'appareil à une tierce partie sans y joindre le manuel.
snom PA1 Quick Start Guide Conforme à SELV (Safety Extra Low Voltage)/TBTS (Très Basse Tension de Sécurité) Le niveau de sécurité des connexions d'entré/sortie est conforme aux recommandations SELV /TBTS. Attention: Pour éviter les électrocutions, ne connectez pas les circuits de SELV / TBTS aux circuits sous tension du réseau téléphonique (TNV). Les ports du réseau local (LAN) contiennent des circuits TBTS et les ports RTCP contiennent des circuits TNV.
snom PA1 Quick Start Guide La collecte séparée et la mise au rebut adaptée des équipements électriques et électroniques ont pour but de préserver la santé humaine et l'environnement ainsi que de permettre une utilisation et une réutilisation rationnelle et prudente des ressources disponibles. Si vous ne savez pas ou mettre au rebut oú faire recycler l'appareil lorsqu'il arrive au terme de son existence, contactez votre municipalité, la société locale en charge de la gestion des déchets ou votre vendeur.
snom PA1 Quick Start Guide Fixation murale Attention: Le câble Ethernet ne doit pas être plié pour éviter les dommages et les pertes de connexion avec le réseau. Nous vous recommandons de disposer le PA1 de façon à ce que le connecteur PoE soit face au port LAN de votre réseau 1. Marquez les positions des trous au mur à l'aide du gabarit. 2. Percez les trous et insérez les chevilles dedans. 3. Placez le PA1 sur le mur avec les échancrures au dessus des chevilles, comme le montre la Figure 1. 4.
snom PA1 Quick Start Guide Connecter le PA1 1. F R A N Ç A I S onnectez le câble Ethernet au connecteur RJ45 libellé "Port 1POE", C comme le montre la Figure 2. Vous pouvez connecter d'autres appareils Ethernet au deuxième connecteur RJ45 libellé "Port 2" sans avoir besoin d'un second câble Ethernet. i PoE n'est pas disponible: Connectez une alimentation 5 V 10 W, qui S a été approuvée par snom, au connecteur libellé "5V DC". 2.
snom PA1 Quick Start Guide État du PA1 Diode rouge Diode verte Démarrage (pour une courte durée) Allumée Éteinte Envoyer la requête DHCP Clignote Éteinte Allumée Éteinte Allumée Allumée Registration du compte accompli Éteinte Allumée Occupé Éteinte Clignote En mise à jour du logiciel Allumée Éteinte avec DHCP sans DHCP Adresse IP & d'autres paramètres réseau reçu du serveur PA1 utilise l'adresse IP & le masque de sousréseau par défaut Démarrage terminé, interface Web accessible Ou
snom PA1 Quick Start Guide Configuration Avec DHCP F R A N Ç A I S Le snom PA1 a un client DHCP intégré. Lorsque DHCP est disponible au réseau, le PA va s'initialiser automatiquement. 1. La diode rouge commence à clignoter - le PA1 envoie la requête DHCP. 2. Quand le PA1 a reçu l'adresse IP et d'autres paramètres réseau (masque de sous-réseau, passerelle IP, serveur DNS, etc.) du serveur DHCP, la diode rouge s'arrête de clignoter et reste au rouge. 3.
snom PA1 Quick Start Guide 1. L a diode rouge commence à clignoter – le PA1 est en train d'envoyer la requête DHCP. 2. Si vous voulez passer l'installation du client DHCP (cette opération peut prendre plusieurs minutes avant qu'elle ne soit annulée par le PA1), appuyez sur le bouton "IP/Reset" tandis que la diode rouge clignote. 3. Après la réinitialisation (ou l'annulation de l'installation du client DHCP) le PA1 va utiliser les paramètres réseau par défaut: Adresse IP: 192.168.0.
snom PA1 Quick Start Guide 4. Cliquez sur "Save", situé au bas de la fenêtre. 5. La question "Apply setting changes?" apparaît en haut de la fenêtre. Cliquez sur "Reboot". 6. Il vous sera demandé de nouveau si vous désirez redémarrer l'appareil. Cliquez sur "Yes". 7. L'appareil va sauvegarder les nouveaux paramètres et redémarrer. Une fois le redémarrage avec les paramètres réseau est terminé, la diode "Power" est au rouge et la diode "Call" est au vert. 8.
snom PA1 Quick Start Guide b. Password: Mot de passe de votre compte. c. Registrar: L'adresse du Registrar de votre logiciel PBX. 4. Cliquez sur "Save" et "Re-Register". Si le compte a été enregistré avec succès, la diode "Call" est au verte, la diode "Power" est éteinte. Votre snom PA1 peut être utiliser. Paramètres Il suffit normalement de saisir le paramètres du fuseau horaire et de la tonalité de numérotation.
snom PA1 Quick Start Guide 3. C hamps de saisie de "Amplifier gain" (augmentation de l'amplificateur): Saisissez 0 ou 1. La valeur par défaut est 1. 4. Cliquez sur "Save". Utiliser le snom PA1 F R A N Ç A I S Composez le numéro de téléphone du PA1 et, quand vous êtes connecté, parlez votre annonce dans le microphone du combiné/micro-casque/boîtier de votre téléphone. Raccrochez quand vous avez fini. Mise à jour du logiciel Automatiquement 1. Interface web> "Advanced" > "Update". 2.
snom PA1 Quick Start Guide 1. Interface web > "Advanced" > "Update". 2. Sélectionnez "Never update, do not load settings" de la liste déroulante de "Update policy". 3. "PnP Config": Sélectionnez le bouton radio "off". 4. Saisissez le lien du firmware au champ de saisie de "Upload Setting file manually" 5. Cliquez sur "Load". Le PA1 commence à redémarrer. La DEL rouge va s'allumer, la DEL verte s'éteint. La mise à jour du firmware est terminée lorsque les deux LED commencent à clignoter.
snom PA1 Quick Start Guide Caractères techniques: F R A N Ç A I S • • • • • • • • • • • • • 54 IEEE 802.
snom PA1 Quick Start Guide Non inclus: BSP (board support package) pour le développement d'autres logiciels. Si vous vous interessez au BSP, parlez-en à votre fournisseur.
snom PA1 Quick Start Guide E S P A Ñ O L 56
snom PA1 Quick Start Guide Ésta es la guía de inicio rápido para la instalación, configuración y uso del snom PA1, un sistema para anuncios diseñado para acceder rápidamente por una interfaz web. El snom PA1 reduce el tiempo de instalación y geniere una red de anuncios públicos segura y centralizada.
snom PA1 Quick Start Guide Copyright, Marcas comerciales, GPL, Renuncia Legal © 2009 snom technology Aktiengesellschaft Todos los derechos reservados. snom, los nombres de los productos snom, y los logos de snom son marcas comerciales propiedad de snom technology AG.
snom PA1 Quick Start Guide lidades según las provisiones legales vinculantes. Nuestro firmware incluye código fuente que puede ser usado y modificado por cualquier persona bajo la licencia pública GNU (GPL) (ver la página 92), siempre que, a su vez, lo haga públicamente disponible con el mismo acuerdo de licencia. Acceda a http://www.snom.com/de/support/download/gplquellcode/ para obtener la licencia GPL original y el código fuente de los componentes licenciados bajo GPL y usados en productos snom.
snom PA1 Quick Start Guide Información importante Lea las instrucciones sobre seguridad telefónica y eliminación, y sobre cómo configurar y usar el dispositivo, antes de usar el dispositivo, y ofrézcalas igualmente a otros usuarios para que las lean o informen a dichos usuarios de su contenido. Conserve este manual y no entregue el dispositivo a terceros sin el mismo. Seguridad • • • E S P A Ñ O L • • • 60 iga las instrucciones de este manual y otra documentación aplicable S del dispositivo.
snom PA1 Quick Start Guide Cumplimiento SELV (Safety Extra Low Voltage - Seguridad de Tensión Extra Baja) Las condiciones de seguridad de las conexiones de entrada/salida cumplen con los requisitos SELV. Atención: Para evitar electrocuciones, no conecte circuitos de seguridad de tensión extra baja (SELV) a circuitos de tensión de red telefónica (TNV), puertos LAN con circuitos SELV, y puertos PSTN que contengan circuitos TNV. Algunos puertos LAN y PSTN usan conectores RJ-45 (8P8C).
snom PA1 Quick Start Guide La recolección separada y adecuada eliminación de dispositivos eléctricos y electrónicos sirven para proteger la salud humana y el medioambiente, así como usar y reutilizar los recursos de forma prudente y racional. Si no sabe dónde puede desechar el dispositivo al final de su vida útil, contacte con su municipio, su proveedor de gestión de residuos local, o su vendedor. Limpieza Use una gamuza antiestática.
snom PA1 Quick Start Guide Montaje en pared Nota: El cable Ethernet no debe doblarse, para evitar daños y pérdida de conexión de red. Recomendamos que coloque el PA1 de modo que el conector PoE mire al puerto LAN de su red. 1. Use la plantilla para marcar las posiciones de los agujeros a taladrar en la pared. 2. Taladre los agujeros e introduzca los anclajes de ampliación en los mismos. 3. Ponga el PA1 en la pared con los recortables sobre los anclajes, como se muestra en la Fig. 1. 4.
snom PA1 Quick Start Guide Conexión del PA1 1. E S P A Ñ O L onecte el cable Ethernet al conector RJ45 indicado como C "Port 1POE", como se indica en la Fig. 2. El segundo conector RJ45, indicado como "Port 2" sirve para encadenar más dispositivos Ethernet sin necesidad de otro cable Ethernet. i no tiene PoE disponible: Conecte el adaptador de alimentación S certificado por snom de 5 V 10 W al conector de alimentación indicado como "5V DC". 2.
snom PA1 Quick Start Guide Estado del PA1 LED rojo LED verde Arranque (para un uso breve) Brilla Apagado Envío de petición DHCP Parpadeo Apagado Brilla Apagado Brilla Brilla con DHCP sin DHCP Dirección IP y otros valores recibidos del servidor El PA1 utiliza la dirección IP y máscara de subred por defecto Arranque completado, interfaz web disponible Interfaz web abierta con dirección IP por defecto Obtener dirección IP y máscara de subred del administrador Advanced > Network > cambiar conf
snom PA1 Quick Start Guide Configuración Con DHCP E S P A Ñ O L El snom PA1 tiene un cliente DHCP integrado. Cuando el servicio DHCP esté disponible en la red, el PA1 lo inicializará automáticamente. 1. El LED rojo comenzará a parpadear – el PA1 está enviando la petición DHCP. 2. Cuando el PA1 haya recibido una dirección IP y otras configuraciones de red (máscara de subred, puerta de enlace IP, servidor DNS, etc.) del servidor DHCP, el LED rojo dejará de parpadear y quedará fijo en rojo 3.
snom PA1 Quick Start Guide 2. S i quiere saltarse la configuración del cliente DHCP (pueden pasar varios minutos antes de que el PA1 la cancele), pulse el botón "IP/ Reset" mientras el LED rojo de encendido esté parpadeando. 3. Después del reinicio (o de la cancelación de la configuración del cliente DHCP), el PA1 usará la siguiente configuración de red: Dirección IP: 192.168.0.2 M áscara de subred: 255.255.0.0 El LED rojo dejará de parpadear y quedará fijo en rojo. 4.
snom PA1 Quick Start Guide 12. E l dispositivo guardará la nueva configuración y se reiniciará. Cuando termine el arranque con la configuración de red, los LED rojo y verde quedarán encendidos fijos. 13. Proceda con "Configurar una cuenta". NOTA: P ulse brevemente el botón "IP/Reset" button para escuchar (en inglés) la dirección IP actual del snom PA1 por el altavoz o auricular conectado. Ejemplo: 192.168.0.2 = one nine two dot one six eight dot zero dot two.
snom PA1 Quick Start Guide rojo "Power" se apagará. Su snom PA1 está listo para su uso. Configuración Normalmente solamente es necesario establecer la zona horaria y el tono, y ajustar el volumen del altavoz y la ganancia del amplificador según sea necesario. Zona horaria 1. Interfaz web > Advanced > Network > Behavior > Time > Timezone. 2. Seleccione su país/ciudad de la lista desplegable. 3. Haga clic en "Save". Tono de marcado 1. Interfaz web > Preferences > General Information > Tone Scheme. 2.
snom PA1 Quick Start Guide Uso del snom PA1 Marque el número de teléfono del PA1 y, cuando el teléfono indique que está conectado, diga su locución en el micrófono manual/de auriculares/del chasis. Cuando termine, finalice la llamada. Actualización de software Automáticamente E S P A Ñ O L 1. Interfaz web > "Advanced" > "Update". 2. Seleccione la política de actualizaciones de la lista. 3. Introduzca la URL del servidor de configuración en el campo de texto "Setting URL". 4.
snom PA1 Quick Start Guide 5. Haga clic en "Load". El PA1 comenzará a reiniciarse. El LED rojo se encenderá, y el LED verde se apagará. La actualización del firmware ha terminado cuando ambos LED comienzan a parpadear. PRECAUCIÓN: Desconectar la alimentación del dispositivo durante una actualización de firmware (LED rojo encendido, LED verde apagado) dañará el firmware y dejará inoperativo el PA1.
snom PA1 Quick Start Guide Características estándar • • • • • • • • • • • E S P A Ñ O L • • 72 IEEE 802.
snom PA1 Quick Start Guide No incluido: BSP (board support package) for further software development. If If you are interested in this package, please talk to your vendor.
snom PA1 Quick Start Guide I T A L I A N O 74
snom PA1 Quick Start Guide Questa è la guida rapida per installazione, impostazione e funzionamento di snom PA1, un sistema di annunci pubblici destinato all’approvvigionamento interno. Lo snom PA1 garantisce un facile accesso tramite interfaccia web, riducendo i tempi di installazione e creando allo stesso tempo una rete sicura e centralizzata di comunicazione.
snom PA1 Quick Start Guide Copyright, Marchi registrati, GPL, Declinazione di responsabilita © 2009 snom technology Aktiengesellschaft Tutti i diritti riservati. snom, i nomi dei prodotti snom, ed i loghi snom sono marchi registrati di proprietà di snom technology AG. Tutti gli altri nomi di prodotti e di imprese sono proprietà dei rispettivi proprietari.
snom PA1 Quick Start Guide Il nostro firmware include codice sorgente utilizzabile e modificabile da chiunque. La licenza pubblica GNU (GPL) (cfr. pag. 92), consente di rendere disponibile il software con lo stesso accordo di licenza. Visitate http://www. snom.com/de/support/download/gpl-quellcode/ per la licenza GPL originale e per i codici di sorgente di componenti sotto licenza GPL ed utilizzati in prodotti snom.
snom PA1 Quick Start Guide Informazioni Importanti Pregasi leggere con attenzione le istruzioni inerenti la sicurezza, lo smaltimento e l‘installazione del dispositivo prima del suo impiego. Tali informazioni vanno condivise con gli altri utenti. È altresì necessario conservare questo manuale, consegnandolo insieme al dispositivo qualora esso venga dato a terzi. Sicurezza • • • • • I T A L I A N O • 78 eguite le istruzioni in questo manuale e tutta la documentazione relatiS va al dispositivo.
snom PA1 Quick Start Guide Conforme al circuito SELV (bassissima tensione di sicurezza) Lo stato di sicurezza dei collegamenti in uscita e in entrata è conforme alle disposizioni del circuito SELV. Attenzione: Per evitare scosse elettriche non collegare i circuiti SELV a quelli della rete telefonica (TNV). Le porte LAN hanno circuiti SELV, le porte PSTN hanno circuiti TNV. Alcune porte LAN e PSTN utilizzano connettori RJ-45 (8P8C). Collegare i cavi con molta attenzione.
snom PA1 Quick Start Guide La raccolta differenziata ed uno smaltimento appropriato dei dispositivi elettronici ed elettrici servono a proteggere la salute umana e l’ambiente e ad utilizzare le risorse con prudenza e razionalità. Se non sapete come smaltire l’apparecchio una volta inutilizzabile, contattate il comune, la nettezza urbana locale, o il vostro rivenditore Pulizia Utilizzare un panno antistatico.
snom PA1 Quick Start Guide Montaggio a parete Nota: Il cavo ethernet non deve essere piegato per evitare danni e perdita di collegamento con la rete. Si consiglia di posizionare il dispositivo PA1 in modo che il connettore PoE sia rivolto verso la porta LAN della rete. 1. Utilizzare la maschera per segnare la posizione dei fori da eseguire nella parete. 2. Eseguire i fori ed inserire i tasselli nei fori. 3. Posizionare il dispositivo PA1 sulla parere con i relativi fori sui tasselli come indicato in fig.
snom PA1 Quick Start Guide Collegamento del dispositivo PA1 1. ollegare il cavo ethernet al connettore RJ45 contrassegnato dalla C dicitura "Port 1POE", come indicato in fig. 2. Il secondo connettore RJ45 contrassegnato dalla "Port 2" è destinato ad altri dispositivi ethernet con topologia di rete che non necessitano di altro cavo ethernet. I n caso di PoE non disponibile: collegare l’adattatore di corrente 5V 10w autorizzato da snom al connettore con dicitura "5V DC". 2.
snom PA1 Quick Start Guide Stato LED rosso LED verde Avvio (per un breve periodo di tempo) Acceso Spento Invio richiesta DHCP Lampeggia Spento Acceso Spento Acceso Acceso Account registrato Spento Acceso Occupato Spento Lampeggia Aggiornamento firmware in corso Acceso con DHCP senza DHCP Indirizzo IP & altre impostazioni relative alla rete inviate dal server Il dispositivo PA1 utilizza l’indirizzo IP e la maschera di rete di default Avvio completato, interfaccia web dispoApertura i
snom PA1 Quick Start Guide Configurazione Con DHCP Il dispositivo snom PA1 dispone di client DHCP integrato. Quando il DHCP è disponibile sulla rete, il dispositivo PA1 avvierà automaticamente la procedura di inizializzazione. 1. La spia LED comincia a lampeggiare – il dispositivo PA1 sta inviando la richiesta DHCP. 2. Una volta che il dispositivo PA1 ha ricevuto un indirizzo IP e altre impostazioni relative alla rete (maschera di rete, gateway IP, server DNS, ecc.
snom PA1 Quick Start Guide 1. L a spia LED rossa comincia a lampeggiare – il dispositivo PA1 sta inviando la richiesta DHCP. 2. Se si desidera saltare l’impostazione client DHCP (possono essere necessari diversi minuti prima che l’operazione venga annullata dal dispositivo PA1), premere il pulsante "IP/Reset" mentre la spia LED rossa sta lampeggiando. 3.
snom PA1 Quick Start Guide 9. 10. 11. 12. 13. maschera di rete. c. Modificare le altre impostazioni di rete, se necessario. Cliccare "Save" nella parte inferiore della pagina. Viene visualizzata la domanda "Apply setting changes?" nella parte superiore della pagina. Cliccare "Reboot". Verrà chiesto nuovamente se si desidera riavviare. Cliccare "Yes". Il dispositivo salva le nuove impostazione e viene riavviato.
snom PA1 Quick Start Guide Manuale 1. N el menu sulla sinistra, cliccare l’impostazione "Identity 1". Viene aperta la pagina "Configuration Identity 1" con il tab "Login" attivo. 2. Inserire i dati richiesti dalla rete nel campo: a. Account: Nome/numero di dispositivo. b. Password: Password per l’account. c. Registrar: Indirizzo Registrar del software PBX. 3. Cliccare "Save" e "Re-Register".
snom PA1 Quick Start Guide Comandi audio 1. Interfaccia web > Preferences > PA1 controls. 2. Volume dell’altoparlante. Campo "Speaker Volume": Inserire un numero compreso tra 1 (basso)e 14 (alto). L’impostazione di default è10. 3. Amplificazione. Campo "Amplifier gain": Inserire 0 o 1. L’impostazione di default è 1. 4. Cliccare "Save".
snom PA1 Quick Start Guide "Subscribe Config", e "PnP Config", se necessario. 5. Cliccare "Reset". Manuale 1. Interfaccia web > "Advanced" > "Update" 2. Selezionare "Never update, do not load settings" dalla casella con la lista delle operazioni "Update policy". 3. "PnP Config": Selezionare il pulsante radio "off". 4. Inserire il link del firmware nel campo "Upload Setting file manually". 5. Cliccare "Load". Il dispositivo PA1 viene riavviato. La spia LED rossa si accende, la spia LED verde si spegne.
snom PA1 Quick Start Guide Caratteristiche standard • • • • • • • • • • • • • I T A L I A N O 90 IEEE 802.
snom PA1 Quick Start Guide Non inclusa: BSP (board support package) per lo sviluppo del software . Per ulteriori informazioni, si prega di rivolgersi al tuo rivenditore.
A P P I snom PA1 Quick Start Guide Appendix 1 COPYRIGHT NOTICE AND WARRANTY DISCLAIMER I. Das Produkt enthält Software, die unter der GNU General Public License, Version 2, frei genutzt werden darf. This Product contains Software applicable to GNU General Public License, Version 2 which can be used freely. II.
A snom PA1 Quick Start Guide P P GNU GENERAL PUBLIC LICENSE I Version 2, June 1991 Copyright (C) 1989, 1991 Free Software Foundation, Inc. 59 Temple Place, Suite 330 Boston, MA 02111-1307, USA Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed. Preamble The licenses for most software are designed to take away your freedom to share and change it.
A P P I snom PA1 Quick Start Guide by others will not reflect on the original authors‘ reputations. Finally, any free program is threatened constantly by software patents. We wish to avoid the danger that redistributors of a free program will individually obtain patent licenses, in effect making the program proprietary. To prevent this, we have made it clear that any patent must be licensed for everyone‘s free use or not licensed at all.
A snom PA1 Quick Start Guide P P parties under the terms of this License.
A P P snom PA1 Quick Start Guide The source code for a work means the preferred form of the work for making modifications to it. For an executable work, complete source code means all the source code for all modules it contains, plus any associated interface definition files, plus the scripts used to control compilation and installation of the executable.
A snom PA1 Quick Start Guide P P If any portion of this section is held invalid or unenforceable under any particular circumstance, the balance of the section is intended to apply and the section as a whole is intended to apply in other circumstances.
A P P I snom PA1 Quick Start Guide EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION. 12.
A snom PA1 Quick Start Guide P P You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA I IV. Den vollständigen korrespondierenden Sourcecode der Software schickt Ihnen die snom technology AG auf Nachfrage gerne auf einem üblichen Datenträger gegen Erstattung der Herstellungskosten in Höhe von EUR 5,- zu.
snom en FRANCE snom France SARL 47 R Marcel Dassault 92100 Boulogne Billancourt Tel. +33 1 80 87 62 87 Fax +33 1 80 87 62 88 info@snom.com; sales@snom.com snom in ITALIA snom technology SRL Via A. Lusardi 10 20122 Milano Tel +39 02 00611212 Fax +39 02 93661864 info@snom.com; sales@snom.com snom in the US snom technology, Inc. 100 Cummings Center, Suite 125-G Beverly, MA 01915 Tel. 978-998-7882 Fax 978-998-7883 infoUSA@snom.
Ihr Fachhändler: Your specialist retailer: Votre distributeur: Su distribuidor: Il tuo rivenditore: snom technology AG Charlottenstr.