User manual

snom Vision User Manual Conﬁguring

Configuring the snom Vision

For general information on function keys on snom phones and on the available functionalities, please

see the manual of your phone, chapter "Conﬁguring the Function Keys".

The conﬁguration of the snom Vision is done on its web interface. To open it, type the device's IP

address (for example, http://10.10.15.110) into the address bar of your PC's web browser and press

ENTER.

Note: To ﬁnd the IP address, tap the "Info" touch screen button or press the hard key

to the left of it. If none of the function keys is mapped with the "Info" function or

if the "Info" key is not on the visible screen, press the left arrow key for three (3)

seconds to open the info screen.

Fig. 1/Abb. 1

Fig. 2/Abb. 2

How the web interface works

The vertical menu on the left side of the window is always the same, no matter which window happens

to be open at the time.

Click on a menu item to open that page.

Note: Changes are automatically saved to the ﬂash memory every few seconds. If you

want to save your entries immediately, click on "Save current settings".