User manual

15
snom Vision User Manual Using the snom Vision
Using the snom Vision
The function keys on the snom Vision work like the function keys on the phone it is paired with. Please
refer to the user manual of your phone for more information on the available functions.
The display screens
The snom Vision has 48 function keys on 3 display "pages". After the snom Vision has booted up,
Page 1 is visible and Pages 2 and 3 can be put on-screen by pressing the left or right arrow keys
below the display. Thereafter, whichever page is on-screen will remain there until you put another one
on-screen (or until you reboot the snom Vision).
The arrow keys work in both directions like a revolving cylinder; pressing the left or right arrow key three
times will bring you full circle to the screen you started out from.
Page 1 Page 2 Page 3 Page 1
Page 1Page 3Page 2Page 1
When a function key lights up on a page that is not visible at a given moment, the LED on one of the
arrow keys lights up as well. In the following examples Page 2 is visible, and there are incoming calls
on the two screens that are not visible. In Fig. 1, there is an incoming call on a monitored extension
on Page 1; therefore, the LED on the left arrow key is blinking. In Fig. 2, there is an incoming call
on a monitored extension on Page 3; therefore, the LED on the right arrow key is blinking. Pressing
the blinking key will put the respective page on-screen, and you will see the blinking LED key of the
monitored extension.
Fig. 1 / Abb. 1 Fig. 2 / Abb. 2
Page 1 Page 2 Page 2 Page 3