User manual

16
snom Vision User Manual Using the snom Vision
Using the function keys
The function key you wish to use must be on-screen. To use it, you can either tap the key's touch
screen area or press the associated hardkey.
or / oder / ou / o
Two of the most common uses of the functions keys are the functions Extension (or BLF, depending
on your PBX) and Speed dial.
• Function key type Extension (or BLF, depending on your PBX). Examples:
◦ If extension 157 is mapped onto an extension key, you can call that extension by touching the
key's touch screen area or pressing the associated LED key.
◦ If both your phone and extension 157 are allowing extension monitoring and are using the same
group ID (and if this function is supported by your PBX):
- Visible screen: The LED of the hardkey will blink red to indicate an incoming call ringing
on extension 157; you can pick up unanswered calls on your phone by touching the key's
touch screen area or pressing the associated LED key.
- Invisible screens: If an incoming call is ringing on an extension mapped onto a function
key on one of the two screens not visible at the time, the LED on one of the arrow key will
blink red. Press the key with the blinking LED to make the screen visible. The LED of the
hardkey will blink red to indicate an incoming call ringing on extension 157; you can pick
up unanswered calls on your phone by touching the key's touch screen area or pressing the
associated LED key
Function key type Speed dial:
◦ Call the speed dial number mapped onto the key by touching the key's touch screen area or
pressing the associated LED key. You can also end the call by touching the touch screen
button or pressing the hardkey.
◦ When a call comes in from a speed dial number, the LED either of the function key mapped
with that speed dial number or of the corresponding arrow key will flash:
- Visible screen: You can accept the call by touching the key's touch screen area or by
pressing the flashing LED key. (This function must be supported by your PBX).
- Invisible screens: If an incoming call from a speed dial number on one of the two screens
not visible at the time is ringing, the LED on the corresponding arrow key will blink. Press
the key with the blinking LED to make the screen visible. You can accept the call by
touching the key's touch screen area or by pressing the flashing LED key. (This function
must be supported by your PBX).