Installation Guide
Self-Contained Ice Maker User Manual for Installation and Maintenance
6
profits or any other consequential damages.
Normal wear type parts, such as light bulbs and gaskets, are not included in warranty coverage.
All equipment must be plugged directly into a standard wall outlet with an appropriately sized
dedicated breaker. Multiple pieces of equipment plugged in on the same circuit (this means sharing
the same breaker) will void the warranty. Any item plugged into a surge protector or an extension
cord will void the warranty. Any item operated on a generator or in an outdoor environment will be
subject to having the warranty be voided. GBE has the right to request the customer to have a
licensed electrician verify all electrical supply before sending a technician to evaluate the equipment.
Improper or inadequate power (voltage) supply will void the warranty.
This warranty is NOT transferable or assignable and applies only to the original verified purchaser.
GBE assumes no liability for parts, labor or replacement coverage for component failure or other
damages resulting from installation in non-commercial or residential applications beyond 30 days of
the paid invoice.
Condensers accumulate dirt and require cleaning every 30 days. Dirty condensers result in
compressor failure, product loss, and lost sales. None of these are covered by warranty.
By keeping the condenser clean you will minimize your service expense and lower your electrical
costs. Condensers require scheduled cleanings every 30 days or as needed. ‘
Air is pulled through the condenser continuously, along with dust, lint, grease, etc.… In order for the
unit to have proper airflow, we require 4 inch clearance around the unit. This does not alleviate
cleaning the condenser every 30 days or as needed.
A dirty condenser can result in NON-WARRANTIED part and compressor failures, product loss and
lost sales. None of these are covered by warranty.
Proper cleaning involves removing dust from the condenser. By using a soft brush or vacuuming the
condenser with a shop vac, using CO2, nitrogen or pressurized air.
If you cannot remove the dirt adequately, please call your refrigeration service company. This is not
covered by warranty.
The condenser looks like a group of vertical fins. You need to be able to see through the condenser
for the unit to function at maximum capacity. Do not place filter material in front of the condensing
coil. This material blocks air-flow to the coil similar to having a dirty coil.
Ice Machines require to be cleaned by a certified ice machine technician at a minimum every six (6)