Operation Manual

UK • 12
Return to contents
Installing your 3Zero using the Windscreen Suction Cup bracket
You can mount your 3Zero to the inside of your vehicles windscreen using the suction cup windscreen bracket provided. Simply
select a position within the windscreen so that the top of the unit has a clear view of the sky, remembering that you need to connect
the power connection cable as well as ensuring that you can read the LED text display and reach the controls safely.
Follow these instructions to mount the unit in this way.
 Install the suction cups onto the bracket by fitting them into the holes (if required).
 Clean the area where you wish to position the bracket thoroughly with a good quality glass cleaner
 Adjust the bracket to the rake of the windscreen by carefully bending it so that when the 3Zero is mounted onto the windscreen
it is perpendicular to the road ahead. The display must be facing the driver and the controls should be within reach of the driver.
Installing your 3Zero using the Dashboard Mounting Bracket
The 3Zero can be installed anywhere on the dashboard as long as the built in GPS antenna has a clear view of the sky and you
can easily see the LED text display and operate the controls safely. You will also need to be sure that you can connect the power
connection cable. Your 3Zero can be installed easily with the dashboard mounting bracket if you have a sufficiently flat area on your
dashboard.
Follow these instructions to mount the unit in this way.
 Use an alcohol wipe or similar cleaner to thoroughly clean the bottom of the dash mount bracket and the area of the dashboard
where you intend to mount your unit.
 Attach the dashboard mounting bracket to the dashboard using the double-sided tape provided. Allow 24hrs for the bracket to
adhere properly before use.