Operation Manual

UK • 18
Return to contents
9. Deleting Stored Coordinates
If you would like to delete any of the coordinates you have stored in your units memory simply enter the units Menu by pressing
the MUTE/MENU button for approximately two seconds. When ‘Pre-Alert appears on the display use the UP/DOWN button to scroll
through the Menu options until you see ‘MEM Edit’ and press the SELECT button.
Using the UP/DOWN button you can select two further options of either ‘Sel clr’ or ‘All clr’. If you want to delete all the coordinates
at once select ‘All clr’ and then press the SELECT button. The display will show ‘All Clr?’ press SELECT again to confirm your selection.
Once all the coordinates have been cleared the display will read ‘Cleared’. If you would like to delete a specific coordinate then you
will need to select option ‘Sel clr’ and then using the UP/DOWN button scroll through the list of stored coordinates until the one you
would like to delete is showing on the display and press the SELECT button. The screen will read ‘Cleared’ to confirm the coordinate
has been deleted.