Operation Manual

UK • 19
Return to contents
Features and Settings
Your 3Zero has many different features and settings that you can adjust very easily.
To access the Menu of the user options press and hold the MUTE/MENU button. Use the UP/DOWN button to scroll through the
options and then select your desired menu item by pressing the SELECT button.
Please Note: If you would like to exit the Menu at any time press and hold the MUTE/MENU button for approximately two
seconds. If you do not press any buttons for a period of five seconds the unit will automatically exit the Menu and return to the
Standby display.
The following menu options are available on your unit. Press SELECT once your desired option is displayed.
1. Tone
There are three audible settings to choose from, a Hard Tone, a Soft Tone or Silent (Off). To select your desired setting press the UP or
DOWN button to scroll through the options available. Once you have chosen your preferred setting press the SELECT button.
2. Laser
This setting allows you to turn the Laser OFF or ON.
To adjust the Laser setting press the UP/DOWN button to scroll up or down through the options. Once you have chosen your desired
setting press the SELECT button.
3. Warn Sel
The 3Zero allows you the option of choosing whether or not you would like to receive advanced warnings of Primary Schools
(Schools are time sensitive on the 3Zero – 08:00-09:30am, 12:00-13:00 and 15:00 to 16:30) and areas such as Accident Black spots that
may not currently have Speed Trap’s installed near them but which are still considered High Risk Zones. Schools and High Risk Zones
can be selected independently by following these instructions.
To adjust these settings use the UP/DOWN button to go through the options (School, Risk zone or Others) then press SELECT. Use the
UP/DOWN button to select ‘ON’ or ‘OFF’ then press SELECT to confirm the setting.
4. Bright
There are three settings that you can choose from for the brightness of the LED display. They are Bright, Dark or Dim.
To adjust the brightness press the UP/DOWN button until your preferred setting is displayed then press the SELECT button.
5. Set Time
The 3Zero can be configured to display the time on the Standby Screen. This reading is generated in Greenwich Mean Time (GMT)
directly from the satellites and is completely accurate. However it does not automatically adjust for British Summer Time (BST) and is
required to be adjusted manually. The device is supplied with the factory default setting of ‘GMT + 0’.
To increase the time difference from GMT press the UP/DOWN button until you reach your desired setting then press the SELECT
button.
To reduce the time difference from GMT press the UP/DOWN button until you reach your desired setting then press the SELECT
button.