Operation Manual

UK • 9
Return to contents
Software CD
Before you can begin downloading the database onto your Snooper 3Zero you will need to install the USB driver software first and
then the 3Zero Updater software that enables you to do this.
There is a certain minimum amount of hardware and software requirements needed in order for the software to be installed and
used successfully.
Hardware Requirements
The computer must have an Intel Pentium Class processor or equivalent, a minimum of 32MB of RAM, a monitor with 256 (8 bit)
colours or greater, a CD ROM drive, 20MB of free disc space and a spare USB connection.
Software Requirements
The software will only operate on the following Windows based operating systems - Windows XP, Windows Vista, Windows 7,
Windows 8 and Windows 8.1.
NOTE: The Snooper 3Zero Updater software does not support Windows 95/98/98SE, Millennium , Windows 2K and Apple
Macintosh operating systems. Windows XP (64bit) is not supported.
Software Installation Instructions
Place the CD ROM into your DVD or CD-ROM drive. Your PC should automatically open a window displaying the instructions for
installing the software.
Please follow the instructions carefully – the USB drivers MUST be installed first BEFORE installing the 3Zero Updater software
program.
If the CD does not ‘auto run’ then you will need to launch the CD manually: Click on Start and then Run. In the dialogue box that
opens click on Browse – another dialogue box will open. Locate your CD ROM drive (drive letter is normally D) using the ‘Look in’
option and select ‘3Zero’ from the lower portion of the dialogue box. Once you have selected ‘3Zero’ click on Open on the explorer
box and then OK on the Run dialogue box.
Connect the 3Zero to the USB lead. The ‘Found New Hardware’ wizard will run. Select the ‘Install the software automatically
(Recommended)’ option and click ‘Next’ to complete the installation of the USB drivers.
Once the software and USB drivers are installed you are ready to download the database to your 3Zero. Double-click the
icon
which now appears on your desktop to launch the program and follow the onscreen instructions.