Operation Manual

Software CD

Before you can begin downloading the database onto your Snooper Evolution

you will need to install the Evolution Updater software first and then the driver

software for the USB PC connection lead that enables you to do this.

There is a certain minimum amount of hardware and software requirements

needed in order for the software to be installed and used successfully.

Hardware Requirements

The computer must have an Intel Pentium Class processor or equivalent, a

minimum of 32MB of RAM, a monitor with 256 (8 bit) colours or greater, a CD

ROM drive, 20MB of free disc space and a spare USB connection.

Software Requirements

The software will only operate on the following Windows based operating

systems - Windows 2000, Windows XP.

Internet Explorer 4.5 or above or Netscape Navigator 4.5 or above must be

installed on the computer

NOTE: The Snooper Evolution Updater software does not support

Windows 95/98/98SE, Millennium and Apple Macintosh operating

systems. Windows 64bit XP is not supported.

Software Installation Instructions

Place the CD ROM into the CD ROM drive. Your PC should automatically

open a window displaying the instructions for installing the software.

Please follow the instructions carefully – the download software MUST

be installed first BEFORE installing the USB driver.

If the CD does not ‘auto run’ then you will need to launch the CD manually:

Click on Start and then Run. In the dialogue box that opens click on Browse –

another dialogue box will open. Locate your CD ROM drive (drive letter is

normally D) using the ‘Look in’ option and select ‘Menu’ from the lower portion

of the dialogue box. Once you have selected ‘Menu’ click on Open on the

explorer box and then OK on the Run dialogue box.

Important: Once you have installed the USB drivers you will need to

restart your PC.

Once restarted connect the Evolution to the USB lead and turn the Evolution

ON. The ‘Found New Hardware’ wizard will run. Select the ‘Install the

software automatically (Recommended)’ option and click ‘Next’ to complete

the installation of the USB drivers.

Any revised software updater or packages can be obtained from

www.snooperneo.co.uk.

Once the software and USB drivers are installed you are ready to download

the database to your Evolution. Double-click the icon which now appears

on your desktop to launch the program and follow the onscreen instructions.

Software CD

Return to contents