Operation Manual
28 • EN
Return to contents
Once a route has been calculated, the ‘Recent Route’ icon is replaced with a ‘Clear Route’ icon. To cancel a route that you have
calculated:
Press the centre of the screen to enter the ‘Navigate to’ menu.
Press the ‘Clear Route’ icon.
The route will then automatically be deleted.
Please Note: For the ‘Clear Route’ feature to operate you will need to have entered and calculated a route. If the ‘Recent Route’
icon is displayed a route has NOT been entered.
3.6 Multi route
With Snooper you have the facility to enter more than one destination at a time (for instance if you wish to visit other locations
before reaching your ultimate destination). You can store up to seven multi-routes, with up to sixteen destinations within each multi-
route. The unit will process and calculate the destinations in the following order: A to B, B to C, and C to D etc. When entering the
destinations you are able to review the routes and change the order of the routes before pressing ‘Go’.
3.6.1 Create a Multi-route
Press the centre of the display to enter the ‘Navigate to’ menu.
Press the ‘Multi-route’ icon.
You will then see the ‘Multi-route screen’ that allows you to:
Create a multi-route
Use or edit a previously stored multi-route
Delete a multi-route.
Press ‘Create multi-route’.
A screen is displayed where you can:
> ‘Edit name’ the name of the multi-route
> ‘Change Start’ the start point of the multi-route
> ‘Add’ your destinations.
> ‘Save’ your destinations
> ‘Calculate’ your multi-route
Press ‘Edit Name’ to create a name for your new multi-route.
Please note: You can enter a new name for the multi-route using
up to a maximum of sixteen characters.
Press the ‘Ar row ’ key to delete the current name for your multi-
route.
Type the new name of your multi-route using the keyboard.
Press the ‘Save’ button in the top right hand corner.
If you wish to change the start position of the multi-route, press
‘Change Start’ to change it. You are provided with several options
to select your start position. To find out how to use these options
please refer to the applicable sections earlier in this user manual.