Operation Manual

92 • EN
Return to contents
SPECIFICATION 2 SERIES
1.1 Product Specification S2500
1.1.1 Environmental parameters Operating temperature range : -10°C ~ +60°C Storage
temperature range : -20°C ~ +70°C Operating Humidity Range : 45% ~ 80%RH Storage
humidity range : 30% ~ 90%RH Atmospheric pressure : 860MBar ~ 1060Mbar
1.1.2 System parameters Frequency : 468 MHz Main chip Model : MTK MT3351C RAM : 128MB(DDR) Flash Memory : 128MB
Supports SLC/MLC NAND Navigation Software Storage : MICRO SD/SDHC OR NAND FLASH Operating system : WINCE 6.0
Software-Compiled Type : ARMV4I
1.1.3 Multimedia parameters and performance : Audio Support Type : MP3/WMA Video Support Type : MP4/ASF/WMV/AVI/DIVX/
XVID Video decoding performance : WVGA (480X272)
1.1.4 Images and text browser : Support Image Type : BMP/JPG
1.1.5 Basic parameters Display Size : 4.3” Display Resolution : 480*272
Sound Output : Dual-channel CD quality Sound power : two-channel headphones 65mW/CHANEL, Single-channel 8Ω/1W
Average Power : 1.5W Standby Power : <20mW
1.1.6 GPS Hardware Parameters Chipset : MT3328 Frequency : 1.575GHZ C/A CODE : 1.023 MHZ chip rate Channels : 66 Channel
(location search) / 22 Channel (tracking) Tracking Sensitivity : -165dBm Positioning accuracy : 10m, 2D RMS 5m, 2D RMS, WAAS
enable Speed : 0.1m/s Data update rate : 1HZ Re-capture time : Average 1s Hot start-up time : Average 2s Warm start-up time :
Average 32s Cold start time : Average 45s Maximum Positioning Height : 18,000m Maximum rate : 515m/s Acceleration : < 4g
Built-in antenna type : Built-in passive ceramic antenna
1.1.7 Built-in TMC Chipset : SI4703 Frequency range : 87.5MHz~ 108MHz Sensitivity : RDS -90DBm
1.1.9 USB 5 PIN Mini-USB port USB Device controller 1.1, USB High speed 2.0; USB Connection : Mass storage OR Microsoft
ActiveSync;
430M-C Product Technical Specification Sheet V1.1
Charging Interface : Working current ≤ 2000mA; (including charge and machine consumption) Universal USB cable charging
current ≤ 150 mA, when the charge does not start, its USB interface definition as follows,
For reference :
PIN Definition :
1. 5V Output to PND ( +5V +/-0.2V, 2A) ;
2. D-
3. D+
4. NC
5. GND;
*Note: Only the SD card
supplied will work with
Snooper once synchronisation
of the card and the unit has
been completed. Replacement
cards are available from
Performance Products Limited.
Please refer to Accessories &
Price List for further details.